Precautions for LED street light construction

With the advancement of urbanization, the number of road lighting and street lamps has been increasing year by year, and in recent years, the usage has increased dramatically. Due to the mature development of LED technology, LED has the characteristics of energy saving, environmental protection and high luminous efficiency, so it is widely used in street lamps. Traditional high-pressure sodium lamps have been replaced by LED street lamps on a large scale due to their high energy consumption and short life span. Road lighting is a lighting field that consumes a lot of electricity. According to statistics, the installation of LED street lights can make the overall energy saving rate reach 50%. So what are our precautions when installing LED street lights?

, must be equipped with a protective grounding wire to prevent unpredictable reasons from causing the lamp pole to be electrified.

, LED street lamp accessories are complete, there is no deformation, paint peeling, etc., it is strictly forbidden to knock on the LED street lamp during construction.

, the longitudinal centerline of the LED street lamp installation and the longitudinal centerline of the lamp arm should be the same, the horizontal horizontal line is parallel to the ground, and there is no skew visually after tightening.

When the LED street lamp head is adjustable, the centerline of the light source should fall within the range of L// of the road width.

, the elevation angle is determined by the street width and the light distribution curve of the lamps, and the elevation angle of each street should be the same.

, the installation height, the installation height of the same street lamps must be the same (the height of the luminous center to the ground).

. Construction safety must be ensured: Before construction, ensure that the construction area has been cut off, and the construction personnel must wear safety belts and helmets before getting on the crane.

We must pay attention to the above matters, careful construction, safe construction, to prevent affecting the overall lighting effect of LED street lights and the safety of construction personnel.