Lighting: The pole material of the courtyard lamp

The yard light pole is a very important part of the major components, so what kind of material is good for the yard light pole? The shaft material of courtyard lights is roughly divided into three types: aluminum courtyard lights, iron courtyard lights and steel courtyard lights. The production processes of these three are somewhat different, and the grinding tools, construction period, and complexity are also different, of course, the effect is not the same. same. The following is an answer from the garden lamp manufacturer. u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e We can assume that there are two rows of symmetrical lights, and the height of street light poles is at least more than 1/2 of the width of the road, so the height of the poles should be 12-14 meters; assuming that a 14-meter pole is used, the installation spacing of street lights is generally lights The pole height is about 3 times, so the spacing is at least 40 meters; assuming that the solar street lights have a spacing of 40 meters and the pole height is 14 meters, the power of the solar street lights in this case must be more than 200W in order to basically meet the main road Lighting requirements. u003cbru003e u003cbru003e u003cbru003e Secondly, the illuminance and power are related to the installation height of the lamp. For solar street lights, we hope that the larger the angle of the irradiated light, the better, so that the uniformity will be good, and the distance between the light poles can be increased, the number of light poles installed is reduced, and the cost is saved. Garden lights are a kind of outdoor lighting fixtures, usually referring to outdoor road lighting fixtures below 6 meters. Its main components are composed of: light source, lamps, poles, and basic parts. Because garden lights have diversity, beauty and beautification And the characteristics of the decorative environment, so it is also called landscape garden lights. u003cbru003e Solar garden light manufacturers summarize the technical requirements of solar garden lights: u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e 1. Comply with the acceptance standards of street lamps in current national regulations. u003cbru003e u003cbru003e u003cbru003e 2. The inner and outer surfaces of the solar street light pole are sprayed with hot-dip galvanized anti-corrosion treatment, and the color is subject to the effect picture. The surface is smooth, does not change color, no pinholes, no sagging, no peeling, etc.; galvanized The thickness is not less than 85 microns, and the spray thickness is not less than 100 microns. u003cbru003e u003cbru003e u003cbru003e 3. The support rods and crosspieces are made of high-quality low-carbon steel, without obvious marks such as dents, and are hot-dip galvanized and sprayed like the main rod. u003cbru003e u003cbru003e u003cbru003e 4. The flange plate is formed by plasma cutting, the periphery is smooth and clean, there is no burr, the appearance is beautiful, and the hole position is accurate. u003cbru003e u003cbru003e u003cbru003e 5. The electrical appliance door adopts plasma cutting, the size is accurate, the surface is smooth and flat, and the anti-theft device and grounding device are welded. u003cbru003e u003cbru003e u003cbru003e 6. The quality of copper-core terminal blocks meets the national electrical industry standards. u003cbru003e u003cbru003e u003cbru003e 7. The design wind speed of the street lamp is greater than 35 m/s, and the earthquake resistance is greater than 8, to ensure the normal operation of the whole pole street lamp in bad weather conditions. u003cbru003e The above is all the content shared by the garden lighting manufacturer.