[BPC8765 LED] Brief introduction of explosion-proof platform light

[BPC LED] Brief introduction of explosion-proof platform light

Scope of application


Applicable to flammable and explosive hazardous locations such as petroleum, petrochemical and chemical enterprises, and applicable to outdoor operations, construction sites and installations, facilities and other places.

Material characteristics


Excellent explosion-proof performance, can be used safely in various flammable and explosive places.


BPC uses high-power LED as the light source, with high luminous efficiency and long life.


It adopts a ring-illuminated light distribution design, with large lighting range, wide angle, high brightness and uniform illuminance.


With excellent corrosion resistance, it can ensure that the lamp can work reliably for a long time outdoors in long-term sunshine, rain, wind and rain.


The shell is made of high-strength aluminum alloy materials and bullet-proof plastic materials, and the optimized structure design has high resistance to strong collisions and impacts.


BPC adopts a hollow heat dissipation structure in the middle to accelerate air convection, effectively control the temperature rise of each component, and ensure that the lamp can work stably and reliably for a long time.


After careful layout design, lighting installation and wiring are convenient, and maintenance is simple and fast.


The installation method can be selected according to the actual site needs, choose to realize the installation of the bent rod through the screw on the top cover or adopt the method of the ceiling bracket to realize the ceiling installation and side wall installation.

Technical parameters


Explosion-proof mark: Ex d IIC T; Rated voltage: VAC Hz; Adapted light source: LED; Light source power: W; Shell protection: IP; Insulation class: I


Anti-corrosion grade: WF; incoming thread: G/; incoming cable: φ~φmm; total weight: kg



Matters needing attention


When installing and maintaining the lamp, you must first disconnect the power supply and wait for the lamp to cool down.


When using, there is a certain temperature rise on the surface of the lamp, which is a normal phenomenon and should not be touched.


The transparent part is made of bulletproof rubber. Do not clean the surface with chemical agents, only wipe it with a damp cloth.


No matter how it is used under any circumstances, the lamp must be grounded reliably.


The bolts at the triangle mark on the top of the shell are factory-used fasteners for opening the cover.