Recently, it is the period when autumn is slowly turning to winter, and the amount of rain has increased significantly. When using
LED street lights, it is necessary to ensure that their waterproof performance is good. If the waterproof work of the LED street light is not done well, the LED street light will not light up and a short circuit will occur. In severe cases, rainwater enters the inside of the LED street light lamp cap, corrodes the internal wires, makes the wires contact with the light pole, and affects people's safety. Therefore, it is necessary to do a good job of waterproofing LED street lights. LED street lights are mainly composed of street lamp poles and LED street lamp heads. The street lamp poles are generally made of integral hot-dip galvanizing and plastic spraying treatment, so they will not seep. LED street lamp manufacturers need to pay attention to the waterproofing of LED street lamp caps. Only the waterproof work of the lamp caps can ensure the stability and safety of LED street lights at night. The following editor will tell you how to do a good job of waterproofing LED street lights.
.The exterior design of the
LED street lamp housing should not be concave. Try to choose the online through-hole style, which will help the LED street lamp housing quickly evaporate water.
.
LED street light chips and lenses must consider their waterproof performance and reach the IP level. The back cover of the street lamp head, the back cover of the power supply box, and the threading hole inside the power supply box are respectively designed with waterproof rubber strips and waterproof plugs with good sealing performance.
. It is necessary to do a good job in the aging detection of the LED street lamp cap. The waterproof rubber strip at the internal joint of the LED street lamp has a service life, and the sealing performance of the joint may decrease after a few years. Therefore, LED street lamp manufacturers must perform aging testing after production to test their waterproof performance to ensure that the waterproof performance is good for at least one year.
The above are three ways to do a good job of waterproofing LED street lights. Of course, when you buy LED street lights, do not choose products produced by small workshops. First, because the small workshops have less production equipment and poor craftsmanship, most of the LED street lights waterproof work is not good, and they must be carried out from regular LED
street light manufacturers. Buy, it is best to remind everyone not to covet LED street lights cheap!
