In-depth Demand Report | Disassembling Battery Powered Indoor Led Lights

I noticed something the other day while driving that really surprised my vision. The first thing was how the stop signs at the four-way stop had lights on them that were flashing red. I thought to myself until this was an exceptional idea, and may also really prevent accidents, especially since that area any little dark at night; not may street lights near the intersection.

Placement on this solar LED light critical if preserving the earth . to work. It rrs determined by where the intake pump is. A conclusion regarding proper placement with the UV could be determined at time of spend money on.

When the yurt went up, so did a uv sterilization lamp, with 25 watt bulb, and now we could discover keyhole overnight. Little did we know during the time that generally that form of lighting fixture wouldn't work because it casts associated with light; the 25W bulb is what saved which.

Another advantage of LED lights is they will put out more light than a typical fluorescent thin. For example, a LED light much more rated at forty-five lumens per watt can give as much light being a fluorescent at this point rated at seventy-five lumens per watt.

Outdoor solar lighting is actually definitely an option when entertaining inside your backyard. Why worry about dragging a lamp the electrical cord outside, plugging it in and then bringing it back inside after you are done utilizing? Solar lighting illuminates outside landscape, is environmentally friendly, and uses energy of a sun to power the lights for this evening. Last not least, solar lights are easy put in because no wiring needed! It is convenient and no worried or mess around with wires and plugins. Here are a few options worth considering when you are outdoor solar street light lighting.

For optimum performance the panels may aimed directly at the Sun, being the strongest source of energy. As the sun moves in azimuth and elevation the Sun strike the panel well below an optimum angles which minimizes amount of your energy available - unless the panel features steering mechanism to take care of the optimum position.

Cross Lighting focuses a couple of spotlights onto opposite sides of a tree, bush or sculpture, either at low level or even height, to show texture relating to the object.

The competition between OLED and LED technology has attracted the attention of LED manufacturers in the past 10 years.
Although the high cost of OLED technology makes it quite difficult to increase the penetration rate, with the investment of OSRAM, LG and other large factories and the huge investment of Chinese manufacturers in OLED display field, can be used in the display industry research and development experience and process equipment advantages OLED and LED technology competition, LED manufacturers in the past 10 years of attention to OLED.
Although the high cost of OLED technology makes it quite difficult to increase the penetration rate, with the investment of OSRAM, LG and other large factories and the huge investment of Chinese manufacturers in OLED display field, the research and development experience and advantages of process equipment in the display industry can make OLED lighting rise rapidly. In addition, the public's awareness of environmental protection is on the rise, and the public's demand for the integration of life and artistic beauty of lamps is improved, so that white OLED lighting is likely to become the next generation of lighting stars.
Automotive lighting can be said to be the spark and mature application market of OLED lighting at present.
In fact, with the new integration of LED technology, lighting has evolved from basic functional features to significant features with potential for automobile value, while OLED is distinguished from LED, and provide the real potential of new added value.
The BMW M4 GTS launched in 2016 is a commercial vehicle that uses OLED technology in taillights.
In addition to the automotive market, OLED lighting manufacturers are also actively entering the traditional general lighting fields such as commercial lighting or office lighting. In addition, OLED technology must also be combined with a number of niche markets to achieve economies of scale and further reduce costs, niche markets include medical lighting and embedded lighting.
According to LEDinside data, OLED lighting panels reached about 1. 1 in 2017.
With a market size of 5. 3 billion US dollars, it is estimated that China's OLED display industry will release production capacity in 2018. At that time, OLED industry will see a sharp increase in yield and a sharp decrease in cost. OLED lighting will also be affected by the current market situation, it is expected that OLED lighting will grow to more than 1. 1 billion US dollars by 2020.
The layout progress of mainstream manufacturers osram osram announced in July 2007 that it would close the OLED display factory in Malaysia and focus on the application of OLED in lighting.
In the past ten years, OSRAM has not only appeared on its OLED desk lamp, but also become a pioneer in the industry in the layout and progress of OLED lighting for vehicles, including BMW and Audi announced from 2015 to 2016 that they are equipped with cars for tail light OLED lighting, many of which are supplied by OSRAM.
LGD in 2017, the layout of LGD in OLED continues to increase. While investing in the display field on a large scale, LGD also actively contacts BMW, hoping to sell OLED lighting products.
It is reported that the supply of LGD and bmw oled lighting products will include taillights and interior lighting.
In addition, LGD also revealed its new OLED brand Luflex at the end of 2017 and announced that it would sell its OLED lighting products with Luflex in the future and use vehicles as a priority supply option, followed by commercial lighting and lighting manufacturers, LGD to become a big OLED lighting brand as the future goal.
GE started the OLED project in 2010. ge r & D Center announced that in the cooperation with Konica Minolta, white OLED has made a 'major breakthrough' and its luminous efficacy has reached 56lmz/W, the use of solution-based coating materials is an important condition for low-cost OLED manufacturing.
GE and KM plan to put OLED flexible lighting products on the market in 2011.
OLEDWorks acquired Philips's OLED light source device business and related intellectual property rights in April 2015 and is currently in the United States (Low capacity amber lighting)And Germany (
Larger Lumiblade panel)Production Panel.
Konica Minolta joint venture company announced on March 2017 that Konica Minolta and two manufacturers merged their OLED business units, and formally established a new 50: 50 joint venture company Konica MinoltaOLED on June 1, 2017.
OLED lighting systems for vehicles will also be exhibited at CES 2018.
Yiguang technology Yiguang technology was a manufacturer focusing on OLED lighting, which was split from vixino in May 2015. Vixino, the head office, started as the OLED project team of Tsinghua University, and later established an OLED company in industrialization, at present, it has been controlled by Kunshan Guoxian and is one of the leading manufacturers in China's OLED Industry. Its main force is lighting, involving automobiles and general lighting.
Conclusion with the development and maturity of LED in the lighting field and the continuous reduction of cost, OLED has long since had no chance to focus on price war, the breakthrough point is to take advantage of OLED, which is a surface light source without blue light damage and can be flexibly folded, to go into the field of high-order Design and avoid the battle with LED's positive cost performance.
Due to the increasing scale of OLED display investment at present, and the lighting requirement for OLED is lower than that for display, the opportunity for OLED lighting to take off in the future, it will still be reflected in the synergy effect of OLED display, optimized supply chain, general research and development, and partial Depreciation of OLED display equipment to reduce the investment cost of OLED lighting. (

Only know these three points, the guangxi rural solar street light when the choose and buy, will clear oneself want is what kind of configuration, it also can be in guangxi rural budget price is in the scope of what the solar street lamps.

With the continuous improvement of science and technology, more and more places are beginning to use lithium battery lamp, the lamp to use more convenient, if it can be equipped with solar panels, the common use, can save a lot of energy, conforms to now the concept of energy conservation and environmental protection, but in the use of lithium battery lamp, also must be regularly maintained, only in this way can ensure the normal operation of street lamp can for a long time, will not affect the night lighting, what you should do to ensure their normal operation?

Look at the following should choose what kind of maintenance method?


1, the professional training of maintenance personnel.



lithium battery street lamps at the time of use, are likely to meet all kinds of circumstance, the fault once appear, is will affect the normal street lamp lighting, so there must be a professional maintenance personnel for troubleshooting and maintenance personnel maintenance level is very important, however, in order to be able to achieve better repair effect, must strengthen the training of maintenance personnel, make its master more professional skills.


2, equipment update
it is also very important, as the name implies, the power of the lithium battery street lamp is lithium battery, it is well known that the use of lithium-ion batteries after a period of time, their internal storage capacity will be reduced, in order to ensure the lighting for night when electricity is enough, will have to be at the time of its storage capacity decreased obviously change lithium-ion batteries, in addition to that, for some of the other aging equipment, and shall timely update.


3 maintenance
target responsibility system, this system is very important, if able to lithium battery street lights maintenance task assigned to different individuals, so clear responsibility, can guarantee the maintenance personnel can be conscientious, once appear, fault or line aging, can timely maintenance and repair, such ability can guarantee solar street lamps lithium-ion batteries can work normally.


the article were used, can effectively solve the problem of lithium battery street light failure, according to the method for maintenance, also can effectively extend the service life of lithium battery lights, so for some lithium battery street lamp manufacturers, it shall, in accordance with the article of this a few ways to do it.

Direct trading pattern: as the name implies, is to 'gang get the cash on delivery', to pay a certain percentage of the deposit first, and then pay when delivery, or pay after project completion, if party a for government agencies will also keep a percentage of the engineering guarantee



direct trading pattern: as the name implies, is to 'gang get the cash on delivery', to pay a certain percentage of the deposit first, and then pay when delivery, or pay after project completion, if party a for government agencies will also keep a percentage of the project margin.

EMC mode: this mode is multi-purpose in luqiao lighting and commercial lighting project, full name is the energy management mode, the mode of operation in a nutshell is the early stage of the provide a batch of LED energy saving lamps and lanterns to the use of party a, then charge to save electricity, or part of a save electricity, suitable for relatively large enterprises, products and energy saving ratio is higher, the shorter the payback period cost, the more the shorter the cost recovery, advantage is that this kind of mode can reduce the pressure on government finances, promoting construction of LED lighting project, the disadvantage is that: business investment is large, long payback period and operation problem, link is too much, must be special fund is special.

T mode: this mode is the basic meaning of, from construction to the transfer and investment by the enterprise construction, and then transfer directly from the government, this pattern in the LED industry application case is more, advantage also can temporarily slow the government financial pressure, simple operation, short payback period, the defect is also a large investment (
Depending on the size of the project amount should be)
, suitable for relatively strong company funds.

Installment mode: this mode is relatively simple, suitable for all kinds of LED lighting projects, more commonly used in enterprise, supermarket, hotel, alleviate the pressure of the party a's capital, to achieve mutually beneficial reciprocal benefit, will tell from the supplier, is more suitable for small and medium-sized LED industry companies.

Resources integration modes: EMC mode, on the basis of involvement in a third party, such as investment institutions or Banks, measure of energy saving costs after a month, guaranteed by the government, Banks or investment agency one-time pay 1 year or 3 years of energy saving money, by bank or investment institutions charge monthly energy saving to the government, and extract some energy saving cost, specific lines can tripartite consultation.

This plan benefits a lot, both for the government to ease the financial pressure, and provides support for enterprise funds, enterprise will not have a headache, because of the large mat endowment disadvantage is cost payback period will be longer, so model is more suitable for large and medium-sized enterprises, if the money is strong, can undertake several projects at the same time, so there are several energy saving money recycling projects at the same time, also can greatly ease the funding problems, and for the LED enterprises to promote the wide range of visibility, production strength of the enterprise and project operation ability exercise, currently USES the model of enterprise is less, believe that with the development of the market, the pattern will be gained popularity.

Packaging operation mode of the project: this pattern is much used in landscape engineering and bridge, is using the method of risk transfer to operate, suitable for LED enterprises, with characteristics of engineering or simple LED and engineering construction enterprises.

Both sides can cooperate to commercial union method, will include line construction, small civil engineering such as foundation pit construction undertake together, suitable for small and medium enterprises and construction enterprises.

Advantage is that can be under the overall project total package industry, and then to the LED enterprises, such as a whole enterprise can directly to the government, LED street lamp, project delivery and acceptance to the overall effect, here is not to do detailed introduction.

Above for the LED industry USES part of the operation mode, when undertaking project, from the early stage of the design to the later operation mode should be a detailed management, select the mode of conform to the enterprise itself.