Looking at the New Industry Opportunities Behind Led Outside Flood Lights

In buying led solar street lamps must have need to do the budget, the price of know they are buying led solar street lamps need to spend how many money, so you can choose to more suitable led solar street light, is in many ways to be able to understand all aspects of led solar street light price budget. First of all, the strength of each manufacturer brand is different, the quantity can it produce specifications species also have certain difference, so the price is above a certain difference, so when you do solar street light price in the budget, the first step you need to think about which a manufacturer produces better solar street lamps, and its price is more affordable, so to do when the corresponding solar street light price budget is very accurate, can through the understanding of the factory, to know what they were buying to spend how many money, but also can save much money, after all, their number when buying solar street lamps need and not a two, but a lot of solar street light. When doing the budget of led solar street light, need to find a good way to buy more, because of different way of purchase, the price also has a certain difference, such as direct sales and wholesale price is always lower than the retail price of led solar street light.

High power led street light is concentrated in the urban roads, sidewalks, it takes the form of is the led lighting. With the continuous development of society, now it can be seen everywhere, so, take a look at it below and what is the difference between ordinary street lamp


high power led street light is concentrated in the urban roads and sidewalks. It USES leds for lighting. With the continuous development of society, it can be seen everywhere. Let's take a look at the difference between it and ordinary street lamp. First of all, the energy consumption is different high power led street light using semiconductor led light source, the average illuminance is 0. 48, higher than the national standard. Moreover, its light is focused, scattering is not going to happen, and it is one way. Therefore, the consumption of electricity are also small, thus ensuring the quality of the lighting and efficiency. However, ordinary street lamp using high pressure sodium lamp. The street lamp light, and fired at them in all directions, so consumes more electricity, the shortage of energy in the form of a disadvantage. Second, different service life and safety. The service life of the high-power led street lamp can reach more than a decade, high cost performance, is the only choice in today's street lamps. Led street light is a safe low voltage products, the safety coefficient is higher than ordinary street lamp during installation. However, short service life of the ordinary street lamp, need to be replaced every five years or so at a time, thus increasing the cost. Above all, a simple comparison of the two shows that although the high power led street light, the purchase price is higher, but during the service life than ordinary street lamp, on average, more economical.

In the first half part of the specifications of the LED chip price decline is as high as 20% ~ 30%, hit the LED industry. LEDinside estimates that global LED market as a whole in 2018 output value of 187. Only $9. 6 billion, compared with 2017 increased by 4%, the growth rate less than 11% of the predicted earlier this year, mainly because the industry supply and demand imbalances, excess supply caused the price of the LED to decline, and trade factors, also affect the final demand.
LEDinside, points out that although there are still a lot of China in 2018 LED manufacturers hope that through the expansion of production capacity to drive revenue growth, but because the overall industry face huge pressure prices decline, many vendors revenue growth than expected. Expansion has sharply after China LED chip manufacturers, terminal supply can't keep up with demand increasing speed, the imbalance between supply and demand in the peak industry, in the first half of this part of the specifications of the LED chip price decline range as high as 20% ~ 30%. Because the chip prices have and the cost of most of press close to, so in the short term to cuts the chance is not high.






as for the demand side, as a result of a trade war with China and emerging markets currency devaluation, LED manufacturers exported to North America and other emerging markets business was significantly affected. The United States recently announced the $200 billion of the tariff list, LED lighting and related products for more than 30, accounting for China's overall lighting products exports to the us, about 7 to an estimated $8 billion. These products will be from September 24, imposing a 10% tariff, and January 1, 2019 tariffs will rise to 25%.
LEDinside think, follow-up may lead to many foreign brand factory reduce the OEM orders for China, so China region including LED encapsulation and downstream of the lighting application vendors will be affected, leading to a sharp drop in demand for upstream of the LED chip.
tariff adjustment will affect the change of the global LED and lighting industry, but LEDinside believes that in the short term, the global LED lighting products and will continue to focus on made in China, because the surrounding components as well as the electroplating process, such as supply chain link takes root in China, in the short term supply relationship won't have too big change. As for Taiwan manufacturers, because most have set up manufacturing plants in China, so most will choose to semi-finished products assembly back to Taiwan, and exported to North America, in order to reduce tariffs. In the long term, with global layout of LED lighting manufacturers, because you can through the outside China factory direct export to reduce tariffs, will be more competitive advantage, a global market share is expected to increase.

In the past, people in the circle asked each other if they had earned money. Now, everyone has asked if they have turned. The boss of an LED company said humorously. Most entrepreneurs believe that after two years of rapid development, the LED industry is about to bid farewell to the scuffle, and mergers and acquisitions will be a good way for enterprises in the fierce market competition. The above-mentioned corporate CEOs believe that the current wave of mergers and acquisitions in the LED industry is not only an opportunity for listed companies, but also an opportunity for unlisted companies. Although the ownership of the enterprise is handed over, the shareholder of the acquirer obtains the listed stock of the acquirer by reselling the equity, which is equivalent to the indirect listing of the enterprise. Moreover, in most merger cases, the original shareholders will not lose their management rights. However, listed companies obviously have more advantages in M & A activities. Lianjian Optoelectronics announced on September 26 that it acquired Shenzhen yishida Electronics Co. , Ltd. in the form of stock cash. The main business of yishida is LED display. It has previously planned an IPO, and the profitability of the company is not inferior to that of its peers. In the upstream of the industrial chain, LED chips have benefited from the rapid development of the Terminal LED lighting market. In the first half of this year, the market for LED chips is still continuing. In the middle of the industrial chain, there is little difference in technology among domestic LED packaging enterprises, but the only difference is the capacity scale of enterprises. Some companies integrate other small business resources through mergers and acquisitions to achieve the purpose of expanding production capacity. Gong Wen, general manager of Jingtai Co. , Ltd. believes that the decisive factors for the competition of packaging enterprises in the future will be management capabilities, cost control, scale and brand. In the downstream of the industrial chain, the LED Lighting Market 2014 as a whole is improving, but due to the homogenization of products, the competition of lighting products is often limited to the price level. Some enterprises open up a competitive strategy of business alienation through integration with the upstream. For example, Hong Kong-listed Zhen Mingli has completed the integration with Tongfang's shares. In the view of Jiang Guangjun, deputy general manager of Zhen Mingli's domestic Center, from the development of the industry last year, LED lighting products will break away from pure price competition and turn to value competition of products. He said that the intelligent building/home lighting solution launched by Zhen Mingli this year is precisely the trend of smart city and the action to adapt to market development. Of course, M & A integration is not a panacea. The industry believes that mergers and acquisitions are not only the integration of the capital market, but also the integration of corporate culture. If the merger and acquisition parties fail to reach a unified goal, the merger and acquisition integration may bring negative effects, and they will face a situation between Dehao Runda and NVC Lighting.

【Ex-KPLB】LED explosion-proof floodlight special lamp for petroleum industry


Application place


Suitable for petroleum, petrochemical and other industries;


Applicable to explosion-proof places such as oil well sites, petrochemical field high poles, large explosion-proof warehouses, gas stations, roads in petrochemical plants;


Class Ⅱ area;

Performance characteristics


Lightweight: Taking full advantage of the small size of the LED light source, a square and flat shape is designed to reduce the weight of the lamp.


Energy saving: using OSRAM and CREE LED light source, when the current is mA, the luminous flux is lm;


Using constant current drive, electrical efficiency is above%; power factor is greater than ., system efficiency is higher;


The reflector and reflecting surface are made of high-purity aluminum, which improves the overall light efficiency and saves energy;


Anti-glare design: the light source is distributed in a circle of the lamp, increasing the light-emitting area, and the anti-glare effect is better;


According to the site environment, prism transparent parts can be selected.


Long life: The heat dissipation ribs and heat dissipation area are large, which can effectively control the temperature of the LED soldering feet, thereby controlling the junction temperature of the LED, making it far lower than the maximum junction temperature allowed by the LED, ensuring a longer life of the LED;


The driving circuit adopts the national military standard three-level derating standard design to ensure a longer life of the driving circuit;


The light source is close to the shell, reducing thermal resistance, accelerating heat dissipation, thereby reducing junction temperature;


The shell adopts fin heat dissipation design to increase the heat dissipation area, thereby reducing the junction temperature and prolonging the life of the light source.


Easy to install and maintain: There are multiple installation methods for sidewalls, poles, rings, seat types, and street lights, which are convenient for installation.


High protection level: IP protection level.


High shell strength: use high-strength aluminum alloy material and adopt a ribbed structure design, so that the shell has higher strength and can withstand scorching impact;


The toughened transparent parts have high strength and can withstand Joule impact.


Safety design: Strengthen insulation and increase electrical clearance to ensure electrical safety;


Various installation methods have anti-loose design to ensure installation safety;


The anti-dropping chain design ensures the safety of installation failure.


Complete configuration: multi-angle light distribution design to meet the requirements of different places, heights and illuminance.

Technical parameters


Product model Rated input voltage (VAC) Rated input current (A) Voltage frequency (Hz) Rated power LED input current (A) Power factor


Ex-KPLB ～ .～. / >.


Product specifications Light color Color rendering index Color temperature (K) Luminous flux (lm)


Ex-KPLB*CH Cool White-


Ex-KPLB*WM Warm White-


Ex-KPLB*NH Neutral White-