Indoor Led Lamps Buying Guide

Price can't be always choose the first condition of scenery complementary street lamps, scenery complementary street lamp price is high is not high is unable to determine its lighting effect and service life, price too gao must decide its use effect is very good, the low price can ensure all of its products to be bad?

Should not only unable to decide, that you should not make scenery complementary street lamp price first.

Since scenery complementary street lamp price can't be the first condition of choice, and that we are going to focus should be on the quality of the products, as long as the quality is pass that the scenery complementary lighting products is really good, a reasonable configuration is a scenery complementary power supply system is the most basic need, if the configuration is unqualified, it is completely out of the energy conservation and environmental protection characteristic with long life-span.

To combine the local energy resources, to know your requirements, select the appropriate configuration, or configuration is exorbitant, scenery complementary street lamp price will be high.

Now a lot of customers to choose and buy when, often is the first sentence and then ask how much is the price of scenery complementary street lamps, no matter what you collocation is configured.

Everyone knows is that road lighting is an important part of city lighting, so in the choice of city lighting is very important.

Now city lighting equipment most commonly used are LED street light, because it has the characteristics of highly efficient safety, and can give people bring light.

To introduce next small make up to you. Why did you choose this kind of lamp for the lighting of the city.



traditional street lamps may cause the waste of energy
before the development of science and technology has not been so advanced, city lighting equipment before use are some traditional lamps and lanterns.

The traditional street lamp is generally used in high pressure sodium lamp, at the time of light, light loss will be very big.

Because the light loss is very big, is largely caused by the huge waste of energy.

Combined with the current global environment is worsening in many countries are developing very clean energy.

So this kind of LED street lamp is a very good lighting choice, it is not cause the waste of energy.


new street lighting can satisfy people's needs of
for urban lighting, it is very important to select good street light equipment.

This can not only to a certain extent, to satisfy people's demand for lighting, also can greatly save the cost of maintenance.

Chose the LED street lamp, can guarantee very long service life.

Not only that, but also very low power consumption, aseismatic ability is very strong, so gradually replace the traditional lighting.


belongs to a new generation of energy-saving light source
LED street lamp current is gradually into people's field of vision, in many people's opinion, it can be one of the most in the world could replace the traditional light source is a new generation of energy-saving light source.

So now the street lamp, became the road lighting energy saving reconstruction of a the best choice.

For most of the urban construction team, in the selection of road lighting equipment, will give priority to this kind of lighting equipment.

For city lighting energy saving and it also has very important significance.

With the rapid development of the cold chain industry, the supporting products around the cold storage are also constantly innovating.
Ordinary lighting lamps are difficult to be used normally in the low temperature and humid environment of cold storage, so LED special lamps for cold storage came into being.
This new cold storage lamp has low energy consumption, high brightness, long service life and no maintenance.
However, due to the misunderstanding of use and consideration of price factors, it is still common to replace LED lamps for cold storage with incandescent lamps, energy-saving lamps, explosion-proof lamps, etc.
As everyone knows, in addition to increasing energy consumption, this practice may also cause harm to food safety.
Current incandescent lamps, energy-saving lamps, explosion-proof lamps, etc. are used for cold storage lighting. Under the low temperature and humid environment of cold storage, many conventional products cannot be used normally, ordinary lighting lamps are prone to explosion or damage in some ultra-low temperature emergency freezing and quick freezing environments.
Before the appearance of special LED lamps for cold storage, the cold storage lighting is mostly replaced by ordinary incandescent lamps, energy-saving lamps, a moisture-proof lampshade, or explosion-proof lamps.
With the development of the cold chain industry, the supporting products around the cold storage are also constantly improving. LED lights for cold storage have emerged as the times require. This new cold storage lamp has low energy consumption, high brightness, long service life and no maintenance.
However, the usage rate of LED lamps for cold storage is not high.
According to Li Zhengliang, deputy general manager of Zhengzhou Henry Refrigeration Equipment Co. , Ltd. and Zhao Xiuguo, sales manager of Beijing jingkelun Refrigeration Equipment Co. , Ltd. , among the users they contacted, not many of them used LED lights for cold storage, it is very common to replace cold storage lamps with incandescent lamps, energy-saving lamps and explosion-proof lamps.
This situation has also been confirmed by Li Shijie, the domestic trade manager of the marketing center of Shenzhen ou en Semiconductor Lighting Co. , Ltd. , and many users are still using traditional incandescent lamps and energy-saving lamps.
LED lights for cold storage have only appeared in recent years. Users who have not been popularized use incandescent lamps or energy-saving lamps to add a moisture-proof lampshade in high-temperature warehouses.
Xie Xiaoru, a salesperson of Zhengzhou Jiahe Lighting Technology Co. , Ltd. , introduced, but this configuration is in-
The frequency of damage in cold storage below 18℃ is quite high, even one is damaged in a few days. There are also some large cold storage with a height of more than ten meters, which cannot be done with incandescent lamps and energy-saving lamps, because the brightness is not enough, most users will choose explosion-proof lights.
The analysis is that irregular use consumes a lot of energy and is easy to cause potential safety hazards. Before the special LED lights for cold storage appear, ordinary incandescent lamps, energy-saving lamps and a moisture-proof lampshade are generally used in cold storage, and explosion-proof lamps are used in ultra-low temperature cold storage, does it not affect the use?
Li Shijie introduced that incandescent lamps, fluorescent lamps, energy-saving lamps and other products have a large calorific value in the cold storage environment, which will increase the power of the air compressor refrigeration, and it is easy to explode and damage, with short service life and frequent replacement, ordinary lamps cannot replace special lamps for cold storage.
Explosion-proof lamps will not explode, but their power is very high. Light sources with higher temperature, such as explosion-proof lamps, energy-saving lamps, incandescent lamps, etc. , are not suitable for use in food cold storage and have too much heat, exposure to food for a long time may corrode food.
Xie Xiaoru said that the cold storage will be frosted or frozen, and the power supply may be short-circuited due to a large amount of frost or icing, causing food safety hazards.
In this case, why are there so many users who have not applied LED lights for cold storage, and what is the resistance to their promotion work? Price is the main factor.
Xie Xiaoru calculated such an account, a 40-watt incandescent lamp only needs 1 yuan, with a moisture-proof lampshade is 30 ~ 40 yuan;
A set of 6 watt LED cold storage lamp is 120 yuan (
LED6 W is brighter than incandescent lamp 40 W).
In addition to the price factor, users' awareness of cold storage lamps is also limited. They think that as long as the lighting effect is realized, no more factors are considered.
The special LED lamp for cold storage is the general trend. It is necessary to strengthen the promotion of cold storage lamp, which is a new type of cold storage light source representing the future development direction of high luminous efficiency, long life and high color rendering of cold storage lighting technology.
So, what are its characteristics and what is its future development direction?
Xia Xingwei, general manager of Zhengzhou Jiahe Lighting Technology Co. , Ltd. , said: light sources are often divided into thermal light sources and cold light sources based on the principle of luminescence.
At present, incandescent lamps, metal halide lamps and energy-saving lamps are basically thermal light sources, and the main energy consumption is heat, not light;
LED light sources are different, the luminous efficiency is very high, and the more in the low temperature environment, the better the luminous characteristics.
Xie Xiaoru added that the high luminous efficiency, good adaptability to low temperature environment, long service life, and completely solved the stroboscopic problem of ordinary traditional light sources.
Therefore, from the general trend, LED to replace the traditional light source is unstoppable. Special lamps for LED cold storage are available in-
It can be started instantly in an environment below 40℃, unlike energy-saving lamps, which need preheating to save energy consumption and no manual maintenance.
At present, our research and development and market for special lamps for cold storage have been more detailed, with professional lamps for cold storage of various specifications, different power sizes and installation methods.
Li Shijie said that LED is a typical environment-friendly, healthy and cold storage lighting source product with unlimited application prospects. It is the best choice to replace traditional light sources and is also the general trend.
In the future, cold storage lamps will develop in the direction of lower temperature resistance, high power integration and intelligent control, such as meeting the needs of low temperature and ultra-low temperature storage, reducing costs, facilitating installation and maintenance, etc.
Xia Xingwei also said that the company will strengthen its promotion and publicity in the field of food processing to bring more convenience to users;
At the same time, it is also hoped that relevant departments and associations and other institutions can play a positive role in guiding the market.

Now the manufacturers are actually not easy. On the one hand, they have to deal with the fierce competition of their peers. On the other hand, they have to face the control of commercial channels. An industry insider feels emotional.
Today's social awareness of LED lighting is continuously improving, and how to better promote and apply LED lighting products has become a problem facing and thinking in the whole industry.
At present, because the engineering company controls the engineering channel to a large extent, it often sees how the engineering company wants to do it, and if there is no assessment of product quality, it can only fight the price.
An industry insider said that under such circumstances, if manufacturers pursue high-quality products, they may die very ugly, because high quality is often accompanied by high prices, the chances of being selected by the engineering firm are also reduced.
In this regard, Rong haolei, the director of Tsinghua Tongheng Institute, believes that from the perspective of the market chain, if the information is asymmetrical and the power is too concentrated in a certain link, it will be a kind of suppression to the market, and it is more likely to be devastating. Therefore, the choice of products should be transparent.
At the same time, the consideration of the product should also be the same. Parameters are one of the aspects. Brand value, product quality and application effect should be taken into consideration and only the correct one should be selected.
From the perspective of design, we hope that we can stand on the position of the owner, make the value relatively transparent, analyze and display the lighting value.
Rong haolei said that LED lighting products are different from traditional light sources. Even with the same parameters, such as the same beam angle and power, the effects vary greatly under the same installation conditions, as a designer, you must make the effect, otherwise you may be accused of design failure.
In the Internet era, the important competitiveness is credibility. LED lighting products cannot be promoted to promote products, but should be promoted to establish a good reputation.
Rong haolei believes that LED lighting products can avoid favorable advance, but should continuously verify the products in application by conveying the real situation.

Solar LED street lamp holder is indispensable in the solar system components, lamp holder damaged even store more electricity is useless.

The detection methods of solar LED street lamp holder is damaged?

That let a professional LED lights for you


the lamp holder of solar LED street lamp is indispensable in the solar system components, even if the store had more power, lamp holder will be damaged and useless.

Detection of solar led street lamp holder what methods of damage?

And then let the professional led street lamp manufacturers introduced to you.

First, we need to clear is that Ed lamp holder is usually divided into two types: built-in constant-current source and constant current source.

Test, we are of different types of lamp holder had better use different test methods.

Here's how to correctly and effectively detects whether two ED lamp cap damage.

Built-in constant-current source, ED lamp holder: the lamp holder of the output is connected directly to the battery negative output, when the lamp holder, separating from the controller, can check whether the lamp holder is normal light.

If not lit, then remove the built-in constant-current source, changed into another and try again, or directly using the corresponding control constant current all-in-one.

If it is properly lit, then the original built-in constant-current source is disconnected, otherwise, the lamp bead is disconnected.

Without constant current source ED lamp holder: constant current source in the lamp holder lamp thicker, divided into three or more.

Try other good controller to replace the same project.

If it is replaced, suggests that the original solar street lamps controller may have a problem.
Otherwise, there is something wrong with the lamp light source.

Please check whether the lamp holder line has a problem, whether the lamp bead damage.

Check the dead lamp bead can use battery checking each 3 or 4 lamps bead.