【ZNSC9700W】Long-life anti-glare channel light channel special light

【ZNSCW】Long-life anti-glare channel lights

[ZNSCW] Long-life anti-glare channel lights are suitable for various indoor and outdoor workplaces, China's coal industry, PetroChina, Sinopec, CNOOC, electric power, metallurgy, railways, steel, ships, troops, aerospace, public security and fire protection, The applicable needs of fixed lighting for chemical industry, government departments, venues, transportation, and large enterprises.

【ZNSCW】Technical parameters of long-life anti-glare channel light: rated voltage: v; light source: electromagnetic induction; rated power: W; working current: .A; luminous flux: Lm; protection class: IP; anti-corrosion class: WF; cable Wire outer diameter: φ~φmm; external dimension: **mm; weight: Kg.

.According to the site environment and lighting needs, determine the installation position and method of the lamp and install it firmly. According to the distance between the lamp and the V power contact, prepare a corresponding length of φ~mm cable.

、Unscrew the two butterfly bolts that fix the front cover on the upper part of the lamp. Open the front cover, and introduce one end of the prepared cable into the lamp cavity through the compression nut of the lead-in device. According to the polarity marked on the terminal block, live wire Connect the 'L' terminal, the neutral wire to the 'N' terminal, and the ground wire to the ground terminal, and then tighten the compression nut of the lead-in device.

. Close the front cover, tighten the two wing bolts above, and then connect the other end of the cable to the V power supply to illuminate.

. When multiple lamps are used in parallel, lead in the cable from another lead-in device to wire according to the above method, and then connect to other lamps; when using a single lamp, plug the idle lead-in device with a plug.

, Loosen the fixing screws on both sides of the bracket to adjust the lighting angle of the lamp within the range of up and down.

, The inside of the lamp cavity is equipped with a support rod, which can be supported as needed after the lamp cover is opened.