Wide application of wall lamp considerations of choose and buy

In the purchase of wall lamp, must first have a look at the quality of itself of lamps and lanterns. Generally made of glass lampshade, and support is usually made of metal. Chimney basically see the suitability of the transmission of light, and the appearance of the picture and color should be with all the style of the bedroom

 in the purchase of wall lamp, must first have a look at the quality of itself of lamps and lanterns. Generally made of glass lampshade, and support is usually made of metal. Chimney basically see the suitability of the transmission of light, and the appearance of picture and color should be all the style that fit with the bedroom. The corrosion resistance of the metal is outstanding, the color and luster is bright beautiful plump are view of the important goals of the quality. In general light soft lights brightness is good, degree less than 60 watts. Other according to the requirements of device select different types of wall lamp, for example: small room with single head wall lamp, room is big with double wall lamp, space is large, they can choose thicker wall lamp; On the other hand, the thin pick some. Final note had better choose light bulb has a protective wall lamp, it can avoid fire wall paper, causing risk. The style of the standard to device and place wall lamp is harmonious, such as big room to double fire wall lamp, small room can be single fire wall lamp. Wall thick with device address environmental harmony. If all round type empty big optional thick wall lamp; If around the narrow optional thin wall lamp. Wall lamp installation method is simpler, after being good bearing, mainly is the fixed wall socket, often choose embedded parts or punching method, the wall lamp is fixed on the wall. Glue coating construction method is more, but there are several in common use. Brush with wool brush method for the adhesive coating on the adhesive, it is the most simple and most commonly used method. This method is suitable for single piece or small batch production and construction. Spraying method' Coating by external force or sucked out from the container medium voltage and forming fog adhesion on the content of works, referred to as the spraying method. 】 About the low viscosity adhesive, can choose general paint spray gun. About the active period is short, clean the difficulty, high viscosity adhesive can choose reinforced plastic 【 Reinforced plastic is plastics containing the reinforced material, it is a kind of important polymeric composite materials. 】 Spray gun industry from Bert system.