What to do if the solar street light does not light up after installation

Solar energy is highly promoted by the country because of its high economic benefits due to its energy saving and environmental protection. With the development of science and technology, the combination of solar energy and road lights has solved the current situation of the difficulty of installing street lights in rural areas, and has been widely used in the construction of new rural areas. Nowadays, solar street lights have become a must for the construction of new rural areas. However, solar street lights are composed of multiple components. When many villagers install them for the first time, installation errors will always occur, causing the solar street lights to not light up after installation. And the quality of solar street lights on the market is uneven, and some solar street lights are not of good quality, which can also cause this to happen. So if we encounter this situation, what should we do? The following editor will give you a few tips.

1. Check the connection of each component. Whether the wires are in good contact with the solar street light controller, solar battery, LED light source and other components. Whether the positive and negative connections of each component are correct.

2. If the gel battery is used, you can look at the flashing status of the solar street light controller, judge the state of the solar system according to the flashing status of the controller, and judge whether the components of the solar street light are normal, and then replace the corresponding solar street light accessories. can.

3. If the solar lithium battery is used, we must first check the connection of each component. If the connection is correct and the contact is good, and the solar street light still does not light up, we must consider whether the solar battery is in an inactive and undervoltage state. If it is in an inactive or under-voltage state, we need to connect the solar panel to the battery for charging on a sunny day, then disconnect the solar panel from the solar lithium battery, and then connect the LED light source to the battery. If the light is on, it means The lithium battery has been reactivated. If the light still does not turn on, you need to consider whether the solar lithium battery itself is malfunctioning.

In short, after the solar street light does not light up after installation, we can't blindly conclude that the quality of the solar street light we buy is not good. First of all, we must try the above three methods. If this situation cannot be solved, we should consult the solar street light. The manufacturer also asked the manufacturer to replace the solar street light accessories.