What should we pay attention to when installing solar street lights?

Nowadays, more and more places use solar energy resources. Solar street lights use solar energy resources to achieve luminescence, and the lighting ability is very strong. However, if the installation process is not careful, the components will be damaged and the light source will not be bright, because the installation location is generally rural roads, and these areas are far away from the crowd, and it is very labor-intensive to repair and after-sale. So a good solar street light represents less maintenance and fundamentally solves the problem. So what should we pay attention to when installing solar street lights?

1. Lamp head, lamp arm, upper lamp pole assembly, solar cell assembly, and other bolt connections are firmly connected without loosening.

2. Guards must be added when installing solar cell modules.

3. When installing the battery module, handle it with care. It is strictly forbidden to short-circuit the module or drop the module.

4. When installing the lamp head and light source, handle it with care to ensure that the light-transmitting cover is clean. There are no scratches. Rolling and throwing are strictly prohibited.

5. Touch the '+' and '-' poles of the solar cell module and the battery at the same time to prevent the danger of electric shock.

6. The output of the inverter is a high voltage power supply, it is life-threatening to touch!

7. The power cord and the junction box. The light pole and the threading part of the module are sealed with silicone, and the battery module connection wire must be fixed firmly at the bracket to prevent the power cord from sagging or pulling for a long time, which may cause the terminals to become loose or even fall off.

8. Avoid scratching the lamp body during installation.

9. Do not touch the battery terminals and control valve when moving the battery. It is strictly forbidden to short-circuit or roll or throw the battery.

10. Pay attention to the positive and negative poles when wiring. It is strictly forbidden to connect them in reverse. The terminals are crimped firmly and not loose. At the same time, pay attention to the connection sequence, and it is strictly forbidden to short-circuit the lines.

11. The galvanized hole of the light pole is sealed with silica gel, pay attention to the appearance.