What kind of configuration of solar street lights save trouble
If you want a high-configuration and easy-to-use solar street light, you must first understand the area's light coefficient, road width and street lamp height, etc., choose the height of the lamp pole and the brightness of the lamp holder to suit, and use the power of each time period. The general number of cloudy and rainy days in this area should be suitable for the capacity of the battery, and the power of the solar panel should be suitable for the storage capacity of the maintenance-free battery. Today, the solar street lamp manufacturer, solar lamp factory lighting, will explain in detail: 1. When the solar street lamp is designed and configured, the battery panel power is small, which will cause the battery to be unsatisfied. The performance is normal at the beginning of use, but after several rainy days, the lamp starts When it gets dark, the whole thing becomes pitch black in less than a year, which is more common. Therefore, when we configure the battery board, the selected power must be appropriate. 2. When the solar street light is designed and configured, if the battery capacity is too small or the setting of the solar street light controller does not conform to the actual local situation, and the brightness of the continuous rainy day exceeds 3 days, the brightness will be significantly reduced, it will be continuous rainy Problems are more likely to occur during periods with many days. Other times, they may appear to be normal. However, once the number of local rainy days often exceeds the setting of the controller, it will bring a huge burden to the battery, resulting in premature aging and life of the battery. Reduce the occurrence of such damage. Therefore, when setting up the controller, we must carefully and accurately consider the number of local cloudy and rainy days. 3. If the LED lamp head of solar street light uses too much power, then the battery may be aging early due to over-discharge. If the power is too low, the brightness is not enough and unnecessary cost waste is caused. The probability of occurrence is relatively small. Therefore, when we choose the LED lamp holder of solar street light, we must carefully choose its power. The above is provided by the solar lamp factory lighting. For more questions, please click on the right picture to consult online customer service.