What is the response to wind solar street lamps

In places where high wind speed, air volume big, every year there are light pole is the wind blow down the accident, lamps and lanterns for the wind damage is more frequent, and the wind dust phenomenon is the important cause leading to the brightness of lamps and lanterns serious attenuation. Therefore, we need to consider when choosing the solar street light is not only to have its beautiful and use function, more important is to pay attention to the wind of lamps and lanterns and light pole and dustproof function, only in this way can guarantee the lamp in the safe use of urban infrastructure, bring convenience to the production of people's travel and life.

as an important part of the street lamp of lamps and lanterns, the quality and open means of lamps and lanterns is very important, the material must be aluminum casting alloy, thickness to meet the requirements, don't allow the lamp body has cracks, holes, parts, joint should have good contact card buckle is the top priority, the lamps and lanterns of previous because of card buckle design is not reasonable, causing damage every time after the wind has a large number of lamps and lanterns, therefore, to use spring card buckle on lamps and lanterns, install two best, lamps and lanterns of open the upper straight away, and ballasts and other important components are fixed on the lamp body, prevent damage of chimney, parts fall off cause safety accidents.

light pole light pole height must be chosen according to the road width and usage, wall thickness can't cut corners, internal and external hot dip galvanized, galvanized layer thickness of 35 & mu; M above, flange thickness above 18 mm. In the past because of the light pole galvanized is unqualified and cause corrosion is serious, at the bottom of the light pole was blown off the phenomenon of light pole. Light pole, therefore, wall thickness, the thickness of the galvanized and whether to add weld reinforcement is an important symbol of light pole qualified or not, otherwise can't use.

street lamp basis as a street light project take cover engineering, wind and safe use of the whole street is also very important part. First of all, should choose to C20 concrete pouring, the selection of anchor bolt according to the height of the light pole, 8 m light pole to choose & Phi; 20 bolt length is 1100 mm, base depth 1200 mm; 10 m light pole to choose & Phi; 22 bolt length is 1200 mm, base depth 1300 mm; 12 m light pole to choose & Phi; 22 bolt length is 1300 mm, base depth 1400 mm; Base, lower than the upper size is beneficial to the stability of the foundation, enhance the wind resistance.

zhongshan solar lamp factory solar street light wind high grade, can be a powerful typhoon resistance to 13, a decade case engineering, stand up to any environment test.