What high lamp installation considerations and solar street lamps common reason

High lamp, believe that friend is not all strange to many customers, but only know light lamps and lanterns, for high lamp installation considerations and high street lamp pole lamp safe sense, believes that many customers friends are sciolistic, it doesn't matter, the following high lamp manufacturer



high lamp' Light, generally refers to more than 15 meters steel conical light pole and high-power modular fixtures are composed of new type of lighting. 】 , believe that friend is not all strange to many customers, but only know light lamps and lanterns, for high lamp installation considerations and high street lamp pole lamp safe sense, believes that many customers friends are sciolistic, it doesn't matter, the following - high lamp manufacturer - - - Sea ray lighting belt you know about high lamp installation considerations and high lamp safety knowledge.

we all know that light is called high lamp, is that it's all in 18 m ~ 35 meters high. Lightning protection measures need to be such, as most common outdoor light, only after galvanizing 【 Hot dip galvanized, 镀锌) Also called hot dipping zinc and hot galvanizing, is an effective way of metal corrosion, mainly used for metal structure industry facilities. 】 After processing, install and use. Such high lamp light pole main conductive won't appear, but in recent years many high lamp light, beautiful into consideration, added a coating process on the surface, silver and white.

to note is that some high lamp manufacturer not considering a problem, the plastic powder itself is insulation, plastic sprayed powder in the lightning rod, lightning rod have no conductive function, if you found this problem, when high lamp installation must inform the installation personnel, top of the lightning rod, plastic powder at least 25 cm from the top down to completely shave their, in rain hat and lightning rod joints, the lightning rod of plastic powder with lightning rod fixed top silk top off, properly conduct electricity.

light lamps, high pressure sodium lamp, in particular, need to pay attention to is when installation, fixed nut connected girder must use wrench to tighten, often see outdoor light, lamp holder drooping down, because there is no fixed screw. Fall also can cause injuries.

when install light lamps and lanterns, if light lamp panel is installed on the LED lamps and lanterns, the lamps and lanterns of drive power points behind the zero line, the line of fire, and earth, when the wiring, ground wire must be connected in a decorated the main cable, if driving power supply ground wire is not connected with the thunderstorm day, there is a certain risk being burned. Also need to pay attention to is the terminal handling, tin wire connection must rinse, then put on insulating tape, combined with flame retardant wax tube, the purpose is to avoid in high temperature and under the rain exposure, line rapidly aging, lead to light, short circuit.

high lamp height is higher, so the light pole is usually composed of two or three pole, two light pole plug shall not be less than 60 cm deep. At the very top of the hook position, basic is made up of three M14 or screw of the M16, installation time need to pay attention to is that the root of the screw must be stainless steel screws, many high lamp manufacturers are ignored, USES the ordinary galvanized iron screw, over time, which can lead to serious rust, caused by decoupling difficulties or unable to decouple, problems in high lamp lamps and lanterns, lamp plate to lift, finally helpless to rental truck, complete maintenance of lamps and lanterns.