What brand of solar street light

The installation of solar street light is different from general electric, the installation of street lamps. From the distance between street lights can be seen when installing solar street lights in residential roads, we find that they are obviously different with the ordinary street lamp installation distance. For solar street lamp, then,

the installation of solar street light is different from ordinary commercial street lamp. If can be seen from the distance between the street lamp, solar street lamp installed in a house on the road, we will find that they are obviously different with ordinary street lamp installation distance. Then, the installation of solar street lamps spacing requirements? What is the installation of more reasonable spacing? Today, the king of the solar street lamps factory manager will bring everyone together to discuss the problem, and find out the answer.

solar street lamp is mainly used for road lighting. When installing solar street lights, if the installation spacing is too large, within the scope of the main lighting there will be a black. In addition, if too close to the installation of solar street lamps spacing, can increase the number of solar street lamps, waste caused by lighting. Install solar street lights in road community generally high about 3. 5 meters. Use of light source is about 15 watts, the distance between the solar street lamp lights about 8 - 12 meters. For some corners, a solar street lamp should be installed more, in order to avoid blind spots. Solar street lamps spacing is determined by various factors, such as lighting power, height and width of the road. The first depends on the width of the road and the demand for lighting. In general, when no more than 10 meters, can be installed in a cross. When the road for more than 15 m, it is suggested that the symmetric lighting in both directions. 60 w split type solar street light for 30 - the best distance 50 m, 30 w integrated solar street light the optimal distance of 30 m.

usually use the following three methods of lighting: single-sided, double-sided cross-border illumination lighting and double symmetry. Crossroads, t-junction and corner special road lighting according to actual situation. If a motor vehicle and non-motor vehicle lanes all need lighting, you can use the unilateral or bilateral two-way lighting. Installing a solar street lamp, pay attention to the roadside installation in does not affect the traffic, in case of pedestrian safety accidents caused by collision.