loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

What are the reasons for the poor heat dissipation performance of LED street lights?

In today's increasingly scarce energy, saving energy is the responsibility of each of us. In response to the call for energy saving and emission reduction, many street lamp manufacturers have replaced traditional high-pressure sodium lamps with more energy-saving LED street lamps in urban street lamp renovation projects. However, the quality of LED street lights on the market is uneven, and LED street lights in many places will not turn on brightly. After all, the reason for this phenomenon is the poor heat dissipation performance of LED street lights. When the heat dissipation performance is poor, the internal temperature of the LED lamp will be too high. When the temperature of the LED increases, its junction resistance decreases, resulting in a decrease in the turn-on voltage. Under the same voltage condition, the increase in the internal temperature of the LED lamp will cause the LED current to increase. The increase in current will further increase the temperature, which will cause the evil cycle to burn the LED chip. Moreover, the internal temperature of the LED street lamp is too high, which will also increase the light decay of the LED chip, which will cause the phenomenon of bright but not bright in the near future. So what causes the poor heat dissipation performance of LED street lights?

1. The quality of LED street lights

The LED chip used has poor thermal conductivity, and the temperature of the LED die cannot be transferred to the surface (heating inside and cooling outside). Even if a radiator is added, the internal heat cannot be dissipated. Secondly, the internal heat of some LED street lamps Add a radiator.

2. Temperature rise caused by LED street lamp power supply

The quality of the power supply of LED street lights is not good. When the LED is turned on, the nonlinearity of the power supply and the weak change of the power supply will cause the current through the LED chip to increase, resulting in excessive internal temperature and affecting the heat dissipation performance of the LED street light.

As mentioned above, the main reason for the poor heat dissipation performance of LED street lamps is the quality of the LED chip and the driving power supply. Therefore, for our buyers, when purchasing LED street lights, we must emphasize to the street light manufacturers to choose high-quality LED chips and power supplies, and not to be cheap. After all, high-quality products are definitely not very cheap. If they are very cheap, then There is a problem.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service