What are the precautions for installing solar street lights

Any process problems during the installation of solar street lights will affect the normal lighting. Therefore, when installing, only pay attention to the connection methods and precautions of the garden lights to make the garden lights perform outstanding use during the installation process. In order to ensure the normal operation of the solar street light system, the system wiring should be carried out according to the following process: 　　 1. Before the construction, the circuit diagram of the street light system should be carefully produced and installed strictly in accordance with the system diagram to ensure that all specifications and models of the system circuit Consistent, no omissions are allowed.　　2. Because the battery is charged when the circuit is connected, in order to prevent a short circuit, everything in the wiring process must be insulated.　　3. Before connecting the battery, wipe off the dust on the battery pole, the shell and the steel frame with a clean linen cloth, and then make sure that all screws are tightened during the connection process. 4. After all the lines are connected, the entire street lamp circuit needs to be tested, and the open circuit voltage of all battery cells and the total voltage of the battery pack are measured and recorded to do the system debugging.　　 The above are the precautions for the installation of solar street lights. You must pay attention to avoid incidents. If you need to buy solar street light products, you can contact our factory. Our company is a professional manufacturer of solar street lights. The price is reasonable and the quality is reliable. It is your best choice.