loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

What are the leds classification

According to the luminous tube leds luminous color points

the luminous tube light color points, can be divided into red, orange, green, And yellow green, standards, green and pure green segment) , blue, etc. In addition, some

leds included in two or three kinds of color chip. According to the light emitting diode out light scattering or after adding the agent, colored or colorless, the above

color leds can also be divided into colored transparent, colorless, transparent, colored and colorless scattering four types. Scattering luminous diode and da

to be light. According to the luminous tube smooth feature points out leds

the luminous tube smooth feature points out round lights, side lights, rectangular, surface light-emitting tube, lateral tube, install with the micro tube surface, etc. Circular lamp according to the diameter of points

from 2 mm, 4. 4 mm, 5 mm, 8 mm phi phi is, from 10 mm and 20 mm, etc. 国外通常把φ3mm的发光二极管记作T- 1; The

phi T - 5 mm 1 ( 3/4) ; The phi is 4. By T - 4 mm 1 ( A quarter) 。 Can be estimated by half value Angle size round Angle of luminous intensity distribution.

3. From the Angle of luminous intensity distribution of LED lights has three types:

( 1) High directivity. Is commonly pointed epoxy encapsulation, or with metal reflective cavity encapsulation, and do not add scattering agent. Half value Angle of 5 ° ~ 20 ° or

smaller, has the very high directivity, can be used for local lighting light source, or with light detector combined to form an automatic test system.

  ( 2) Standard. Usually used as indicator light, the half value Angle of 20 ° to 45 °.

  ( 3) Scattering model. This is a bigger light Angle, half value Angle is 45 ° ~ 90 ° or greater, the amount of scattering agent is bigger. According to the structure of light emitting diode points LED lights

according to the structure of light emitting diode points with epoxy coating, metal base epoxy encapsulation, ceramic base epoxy encapsulation, glass encapsulation structure, etc. According to the luminous intensity and working current leds

the luminous intensity and working current are normal brightness LED ( Luminous intensity & lt; 10 ') ; High brightness LED ( Luminous intensity & gt; 100mcd)

; The luminous intensity between 10 to 100 MCD called high brightness leds. General LED working current in a dozen mA to dozens of mA, and low current LED

the working current of below 2 mA ( Brightness and ordinary light-emitting tube is the same) 。

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service