loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

What are the factors that affect the test results of LED street lights?

The combination of LED technology and road lights makes road lighting enter a new stage of development. LED street lamps have become the focus of Ru0026D and innovation by street lamp manufacturers, and LED street lamps must be tested before they leave the factory, and only after they are qualified can they flow into the market. However, the LED street lamp test results are actually affected by many factors, and sometimes subtle factors can also affect the overall test results. Today, I will tell you what are the factors that affect the results of LED street lights.

One, temperature factor

Temperature will affect the luminous flux of the LED light source chip and the output current of the drive circuit. Generally, it will have a greater impact on the luminous flux of the LED chip, and the output current of the drive circuit has little effect.

Two, the accuracy of the test equipment

The accuracy of the test equipment includes parameters such as spectral matching error and temperature coefficient, which will affect the detection results of LED street light flux. When the accuracy of the test equipment is normal, it is necessary to ensure that the luminous flux is within a percent error.

3. The influence of stray light

The effect of stray light. Stray light includes the illumination of vehicles on the road, the light radiation of adjacent street lights, the interference of other light sources on the roadside, and the interference of light reflected by the street light source on other objects. The influence of stray light should be shielded during the test.

Four, environmental pollution factors

The impact of environmental pollution. Surface contamination will have a great impact on the test results, and the magnitude of the error can reach ~%, especially some products whose light-emitting surface doubles as the surface of the secondary optical lens have a concave-convex structure, which is easy to trap dirt and is not easy to clean. , This will seriously affect the LED street light flux and further affect the light distribution.

The above are the factors that affect the test results of LED street lights. Street lamp manufacturers should not only pay attention to these factors when testing, to ensure the accuracy of the test results, but also learn to cleverly prevent these factors from affecting the test results. So how to prevent it?

. The measurement accuracy should be at least better than %, and a higher standard test instrument should be selected;

. The influence of temperature must be controlled or compensated, and the change of ambient temperature within the test time span is preferably less than ℃;

. Light collection must avoid all kinds of stray light interference;

. The serious impact of surface pollution of LED lamps on the test must be considered. If the LED street light is installed in summer and the luminous decay is measured in winter, the effect will be better.

The last thing I want to say is that street lamp manufacturers must not only do a good job in the inspection of LED street lamps before they leave the factory, but also do a good job in the quality of LED street lamps. Each adopts high standards and high technological requirements to manufacture LED street lamps and pursues product quality. I believe Such LED street lights are what consumers love.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service