Although the use of solar energy street light has many advantages, such as don't lay lines, such as don't consume electricity, etc, but will still have some problems in use, for how to solve these problems, you can take it.
problem a voltage, the solar panels, but not charging the green light is LED1 light, without charging operation. Generally this kind of circumstance is the controller connected panels caused by the poor contact of the interface, just check and processing.
question 2, green indicator light LED1 flash very quickly, which means that the system voltage has the overpressure condition. Kind of situation is due to the battery connection is usually caused by abnormal, the charging circuit is damaged, as long as it clearly is what circumstance, then make corresponding processing.
3, the light not bright, is working in the outdoor solar street lamps, to meet all kinds of weather conditions, parts may be caused by the influence of environmental light can't light up. Usually encountered this kind of circumstance needs to check whether the controller is produced which in turn rust, if damaged, check the battery voltage is normal, whether to need to be replaced, finally check whether the panel is damaged. Where there is a problem is solved the problem of which parts, if no problem, check the LED lamp holder, direct power supply to check, can be replaced if damaged.
4, indicates the red LED3 load problem, if the light load is not working, just checking on the load end connection is dealt with, if the lights flashing and load did not work quickly, about load short circuit happens, the corresponding processing, if the lamp is slow and load did not work, the load of power happened too large, the corresponding processing.
the hard to avoid in the process of using solar energy street light has to deal with a problem, but have a problem need not panic, in the manner of the above check appropriate checks and then carry on corresponding processing are generally able to just in time to solve the problem.