Under the solar street light lamp fault and avoid

1, and the small cage fixation strength, resulting in installation of lamps and lanterns is not stable. Cause analysis: there is no foundation design professionals; To production personnel to cage welding cage was not strict quality; To cut corners, shoddy. How to avoid: lamps and lanterns design professionals, protect

1. Cage fixation strength is too small, lead to install lamps and lanterns is not reliable.

root cause analysis: without the basis of professional designers; Cage manufacturers are not strict about the quality of the cage welding. To cut corners, shoddy. How to avoid: the lamps and lanterns of professional designers to ensure design quality, high-quality production personnel and quality control of internal inspection, strict control of ground cage welding quality. Quality control from raw material to finished product quality inspection, to ensure that the product meets the requirements. 2. The basis of the unreasonable structural design lead to battery soak in the water.

cause analysis: there is no professional design personnel on the basis of the reasonable design, site construction personnel to the site control ability is poor, cannot be based position adjustment according to actual situation. How to avoid: excellent professional design personnel according to the actual survey 12 m light pole on the basis of structural design, qualified on-site construction team can according to the factor to carry on the reasonable construction. 3. Battery compartments without heat preservation measures, battery capacity reduced.

root cause analysis: the concept of designers have no battery insulation, construction personnel professional quality is not high, not fully follow the technical requirements. How to avoid: excellent designer can according to the local climate, professional construction team for special treatment, and strictly follow the standard operating procedures. In addition, it is necessary to:

4, the installation of qualified construction team, to ensure timely find problems in the installation process, and to propose solutions. 5. Professional designers must understand the situation, timely conduct site inspection when necessary, to ensure the rationality of the system design of lamps and lanterns.