There are several 150 watts of solar projection lamp samples

With the continuous development of solar technology, solar street light products is more and more popular, many rural areas are installed solar street light, but many issues should pay attention to install solar street lamp, especially in the select installation location and embedded foundation, a lot of people are not

with the continuous development of solar technology, solar street light has become more and more popular. Many rural installed solar street light, but many issues should pay attention to when installing solar street lights, especially when choosing installation position and embedded foundation, a lot of people won't notice, leading to poor solar street lamps use effect. So when choosing installation position and foundation should pay attention to what? First of all, the choice of the installation position installation site must have enough light throughout the day, and ensure the installation location away from trees, tall buildings and other obstacles blocking sunlight. Solar panels should be no direct light source of the above, otherwise the street lamp system will be unable to work normally. Solar street lamps must be far away from heat source, or a shorter battery life. Solar energy lamp must be the basis of pouring in the clay layer of strong enough. If the installation site is sand, and other atypical permafrost soil, please inform us in advance, in order to take targeted measures. Solar panels must be toward the south, the south and ensure the installation location, no obstacles. Second, lay the foundation to ensure the internal measurement nut screwed to the threaded end, and the length of the solar energy light pole flange to set aside enough, to ensure that the four bolts in the same level. Suggestions in level with tape to protect the upper thread after testing and assembly, in order to prevent the cement plug threads. 3. Install base according to the solar street lamp manufacturers provide foundation drawing for foundation pit excavation. The concrete can preparation at the same time. Put foundation cage in foundation pit, placed in a level to ensure that the basic carrier, and compact foundation cage. Again to confirm the thread at the top of the anchor bolt protected with tape, pouring concrete and maintain the basic level in a cage. Suggested that the concrete cover only a fixed plate and the nut, in case of rust. The top with a trowel make level 3 - clean basis After 7 days, after confirm the concrete curing and drying completely, dismantle segregation board/brick. These are matters need to pay special attention to when installing solar street light. When installation should pay attention to, lest appear no lighting or lighting the effect not beautiful.