The working principle of solar gel battery

The working principle of solar colloidal battery: colloidal lead-acid battery performance is superior to the control valve of sealed lead-acid batteries, colloid lead-acid battery has the use of stable performance, high reliability, long service life, temperature adaptability to the environment ( High and low temperature) Strong

the working principle of solar colloidal battery: colloidal lead-acid battery performance is better than that of valve-control sealed lead-acid battery, colloid lead-acid battery has the use of stable performance, high reliability, long service life, temperature adaptability to the environment ( High and low temperature) Strong, bear long time discharge capacity, cycle discharge capacity, depth of discharge and large current discharge ability is strong, have to over charge and discharge protection, etc. At present the domestic colloid lead-acid battery for electric bicycle is by vacuum infusion in the lining of the AGM, the silica gel and the sulfuric acid solution between irrigation and battery positive and negative plate. Colloid lead-acid battery to oxygen cycle at the beginning of use, this is because the colloid has surrounded the positive and negative plate, positive plate of oxygen diffusion to the negative plate to the above, cannot be achieved with the active material of lead on the negative plate reduction, can only through the exhaust valve, consistent with rich liquid type battery. Colloid lead-acid batteries used for a period of time after colloid began to dry and shrinkage, cracks, oxygen oxygen cycle through the cracks directly to the negative plate. Exhaust valve no longer often open, colloid lead-acid battery is close to sealing work, little water loss. So for electric bicycle battery is main failure mechanism of water loss, the colloid lead-acid battery can obtain very good results. Gel electrolyte is through add gels to sulfuric acid in the electrolyte electrolyte solidified into colloidal substances, often also in the colloid electrolyte with colloid stabilizer and compatibilizers, LED street light, some gel formula with delay colloid solidification and retardant, so that the colloid filling.