The solar energy light pole manufacturer2

Now ordinary lighting lamps work fixed high electricity, to long-term continuous lines and other configuration for maintenance or replacement, maintenance costs increasing year by year. Solar street light is a one-time investment, however, no maintenance costs, the investment can be returned three years into a

now ordinary lighting lamps work fixed high electricity, to long-term continuous lines and other configuration for maintenance or replacement, maintenance costs increasing year by year. Solar street light is a one-time investment, however, no maintenance costs, pay back your investment in three years, long-term benefit. But the requirement of solar street lamps to light pole is higher, the next small make up and you tell me something about the solar street light light pole what are the requirements of technical reference.

1. Main stem is made of a forming, steel bar ( Q235) Weld should level off is smooth, the whole root weld convex part of the rod body and the error of leveling rod body should be no greater than & plusmn; 1mm。 Light pole welding method for automatic arc welding, coloring flaw detection of international GB/T3323 - welding 1989111 standard requirement. Light pole socket means using nail and wire fixation.

2, light pole, anti-corrosion treatment for hot dip galvanized, galvanized layer surface is smooth and beautiful, luster. Not wrinkled skin, flow drop and zinc tumor, peeling, spots, surface defects of Yin and Yang, the zinc layer thickness reach more than 85 um, galvanized layer adhesion should comply with the GB2694 - 98 standards to ensure that the 8 years do not fade, light pole wind resistance ability by 36. 9 m/s design. Solar street lamps light pole anti-corrosion life more than 20 years.

3. ≧ 100 um light pole surface coating thickness, adhesion to GB9286 - Level 880, smooth surface, hardness ≧ 2 h, using outdoor weatherability material, coating material for the polyester molding powder.

4. Light pole technology and acceptance standard execution according to the national standards. 1 design coefficient. 8. Light pole design life is more than 20 years.

5. Light pole should be designed to facilitate wire wear, hand hole door adopt backpack door form. Bar the door must level off is smooth, with this cue is flat and level error is not more than & plusmn; 1 mm, the same light pole from door to door is better interchangeability, meet the requirements of security rainproof. Bar the door local do after cutting, the strength of the basic in the whole bar.

6. Appearance color: the color specified by the owner.

this is the requirement to the lamp post, solar street light though seemingly simple, but its installation requirements are more, we should step by step, in accordance with the requirements for its operation.