The reasonable configuration of solar street lamps

Walking at night under the solar street light irradiation, we is not hard to find, there are some problems in the installation of solar street lamps. Is that we under the solar street lamp brightness particularly big, and then on to the next solar street light, there will be a dark area; Or is there a situation is, overlap between the two lights lighting area.

it will appear this kind of circumstance is caused by solar street light distance is too large, because the solar street light illumination Angle and Angle, the height of the light pole and illuminant irradiation in 60 - general perspective Between 130 degrees, so that can cover a big area, light pole under the condition of the same height, if there is a dark spot area, show a larger distance between the two lights, if light overlap, the distance is too small, you need to expand the two lights in the distance, distance lighting reflect not to come out, the significance of closer and wasted energy resources, so when installing solar street lamps need reasonable configuration.

we use solar street lamps in the new rural, rural roads is about 5 - wide 6 meters, requires constant light more than five hours as an example, to set reasonable configuration and solar street lamps. 5 meters wide road, the use of solar energy street lamp, lamp pole height is 5 - About 6 meters, 30 w illuminant, and 90 w solar panels and 90 ah battery ( Configuration can change according to the requirement) That lamp is apart from the best interval between 35 meters.

a reasonable allocation of solar street light, can be in use won't appear between the two lights have a not according to the overlap area or lighting area, not cause waste of resources, to use reasonable resource to illuminate the road home at night.