The layout of LED manufacturers increases the output of LED lighting products

LED manufacturers are actively increasing the output of LED lighting products. One of the products just launched this year is LED fluorescent lamp (FL)Tube, has been widely output. According to the new NPDDisplaySearch report ( LEDLightingMarketandForecastReport) The international market share of LED lamps will reach 6 in 2013 and will rise to 22 in 2016. 3. FL lamp 2013 will output 0. 2 billion 30 million a 2016 is expected to Will to 0. 7 billion 91 Million A. NPDDisplaySearchLED analyst StevenSher said: 'LED lighting provides innovative lighting devices and effectively reduces energy consumption. Especially in areas where power is scarce, LED fluorescent lamps will most likely be popularized, and LED lighting equipment will be widely used. The output of LEDFL lamps in Japan, the United States and Europe continues to increase. As a newborn in the market, LEDFL is obviously not the choice of consumers, but the market is still growing for the following reasons: LEDFL lamps are considered to be green and environmentally friendly products. because Mercury is not used in its production process. LEDFL lamp can save electricity by 50, luminous efficiency factor (powerfactor)At 0. 9-0. 99, while T8FL lamp tube is only 0. 7/. The service life of LEDFL lamps is longer than that of T8FL lamps, which is expected to be 5 years or 30 thousand hours. LEDFL tubes are ideal for replacing old-fashioned tubes that are now used in offices or basements, because these areas often require 24-hour lights, and energy saving is crucial. In the technical part, although the previous problems about the large radiation angle and color quality of LEDFL lamps have been solved. However, challenges still exist, especially the problem of high cost, which has become the first problem in the process of promoting LEDFL lamps into substitutes for old-fashioned lamps, because old-fashioned lamps are cheaper after all. LED manufacturers are trying to narrow the price difference between the two through design and cost reduction. One method is to design a power module suitable for most LED lighting products. In 2013, some power module manufacturers designed a new product for MR-16, A- The use of Lamp and LEDFL and other types of lamps has reduced the cost of these products by 10. 5%.