The latest LEDled street light lamp base casting temperature and structure of image resolution

Led street light foundation casting must note: set the led street lamp position; Survey and geological situation, if the surface of the 1. 2 m are all a hotchpotch of soft soil, the excavation depth should be deepened; Excavated location are to confirm there is no other facilities at the same time, the led street lamp at the top of the no shading objects for a long time, otherwise

you must be aware of the led street lamp foundation casting: set the led street lamp position; Survey and geological situation, if the surface of the 1. 2 m are all a hotchpotch of soft soil, the excavation depth should be deepened; Excavated location are to confirm there is no other facilities at the same time, the led street lamp at the top of the no shading objects for a long time, otherwise it should change the position. Reserve base set led street lamp light at a fixed location in accordance with standard 1. 3 m pit; Up with location and casting. Embedded parts are placed in the square in the middle of the pit, PVC threading pipe end in embedded inserts right in the middle, on the other end in the storage battery. Keep the embedded parts, foundation and ground in the same horizontal plane, one side should be parallel to the road; This can guarantee the light pole erected after correct and not skewed. Fixed and then to C20 concrete pouring, casting or stop using vibrator vibration in the process, to ensure that the overall density and robustness. Street lamp base profile are completed, clear in time positioning plate residual sludge, and the waste oil cleaning bolt impurities. Xing tai led street light network lighting group co. , LTD. , reminding customers construction concrete solidification process, water them regularly maintenance; For concrete completely frozen, led street lamp installation can proceed.