The importance of traffic lights to drive at night and light-emitting diodes

The setting of road traffic lights have distinctive features is the ability to adhere to the colourful, specific which never fades, special blue and white color is particularly prominent in the daytime, can give the driver drove very clear warning role, even when you are driving at night by

the setting of road traffic lights have a distinctive features: it can adhere to a specific color, is bright, never fade, particularly during the day, especially the blue and white which can give the driver a clear warning function. Even if the driver when driving at night by the lights have the effect of reflective, because mark surface reflective film, the driver can glance through clearly see the road ahead, will not make a mistake, reduce the occurrence of safety accidents. Traffic lights are very useful in various aspects. # 8203;

1。 Transport to all traffic signs of component of the construction site should pass strict quality inspection standards, and approved by the supervision engineer rear can use. 2, arrived at the scene in the future, make full use of signs, railings and other safety devices to pedestrian and traffic management, in strict accordance with the procedures of construction, to ensure the safety of the passers-by and operators, as far as possible to prevent accidents, ensure the construction safety; 3, strictly in accordance with the requirements of the construction drawings and according to the traffic flow in the direction of the journey to determine the sign set direction; 4, by sliding bolt, clamp under fittings will sign on the column, such as single column bottom edge of the sign should guarantee from road surface height 250 cm; 5. Orientation is determined, according to the standards set by the design drawings, foundation excavation at the specified address. Basis according to the standard after treatment, the model of steel and concrete. The direction of the anchor bolt and base flange should be correct, and reach the standard level. 6. Sign installation of support structure shall be met the requirement of the foundation concrete strength and after approved by the supervision engineer. Pillars of flange plate and concrete foundation base flange plate should be closely, the anchor bolt should cooperate and firm, after the bolt tightening pillars shall not be skewed. 7. After installation of signs, check and adjust the signs of straightness and height, and make it conform to specified requirements. 8. After the completion of the marking device, cleaning assignments, neat layout and logo.