The design of the solar energy battery components in the LED street lamp1

Solar LED street lights are generally equipped with battery components above, is primarily used to absorb solar radiation, the solar LED street lamp battery components is how to design the designer again for the sake of what to be like this design? They have what concerns? This article will guide you to solve together to understand the questions and answers. Solar energy battery components design of LED street lamps as follows,

the reason one, in order to make solar LED street lamp to receive solar radiation as far as possible some more

in general solar LED street lamp design of the battery components will be a Angle, and only suitable for Angle design can let more solar radiation absorbed by the solar LED street light. So its Angle design is a very rigorous academic problems. So all the solar LED street lamp design practice to design one of the most put the point of view of its battery components. As for the reason is it in order to make the absorption of solar energy as much as possible to maintain their stable lighting solar radiation.

the reason 2, in order to withstand the threat of winds

as a solar LED street lamp must be set in the outside all the time. If it is set up in the good environment is also good afraid of natural threats, but if is erected in a terrible natural threat where should I do? Such as the wind. So there will be a solar LED street lamp will wind resistance design. This can help those in bad environment of solar LED lights withstand high winds. In general the wind solar cell components under two thousand seven hundred mpa pressure is more than enough. If the normal is equivalent to a level 10 typhoon wind resistance coefficient of 27 meters per second, on the basis of the viscous fluid mechanics, solar LED street lamp only need to bear the pressure three hundred and sixty-five mpa. So the solar energy battery components are completely can withstand. So is the battery components to consider stent design of wind.

solar LED panels is designed inclination and wind design. Design reason is that in order to make the solar panels to absorb solar radiation as much as possible, and to make solar LED street lamp withstand winds blow.