Looking at the New Industry Opportunities Behind Solar Motion Sensor Flood Lights

Lithium-ion batteries use should pay attention to the myth of solar street lamps, solar street lamps factory small make up to you, the main contents are as follows: 1.

Charge need to charge for the first time enough for 12 hours;
2.

Homework when charging, or charge eventually for external power supplies and battery will damage the host will continue to use the




lithium-ion batteries use should pay attention to the myth of solar street lamps, solar street lamps manufacturer introduce small make up to you, the main contents are as follows:
1.

Charge need to charge for the first time enough for 12 hours;

　　2.

Homework when charging, or charge will eventually damage the host will continue to use external power supplies and battery;

　　3.

ChuDu use demand repeated three times, in order to activate the battery charging and discharging;

　　4.

Once a month fully charge and discharge demand price solar street lamp pool.

As we all know, the less developed areas of rural economic has always been, and coincides with the new rural reconstruction, choose rural relative, solar street light or ordinary street lamp lighting below will give you something about rural solar street light compared with the ordinary street lamp what benefits,




as we all know, the less developed areas of rural economic has always been, and coincides with the new rural reconstruction, choose rural [solar street lamps

Solar street light is a crystalline silicon solar battery power supply, valve control type sealed and maintenance-free battery (
Gel battery)

Store electricity, super bright LED as light source, lamps and lanterns and controlled by the intelligent charging and discharging controller, is used to instead of the traditional public power lighting lamps.
】

Under the relative, or ordinary street lamp lighting will give you something about rural solar street light compared with the ordinary street lamp what benefits, why choose rural solar street light.




rural solar street lamp is mainly composed of solar panels (
Solar panels,
太阳能板)

Is by absorbing sunlight, the solar radiation through the photoelectric effect or photochemical effect directly or indirectly converted into electrical energy device, the main material of most of the solar panel as the 'silicon', but because of the production cost is larger, so it widely used, we still have some limitations.
】
, LED light source
LED light source is the light emitting diode (
领导)
For light source of light.
】
【, solar controller

Called the solar controller solar charge controller, is used for solar power generation system, the control of multiple solar cell phalanx of battery and battery for solar power inverter load automatic control equipment.
】

And waterproof battery, etc, and rural solar street lamps light source brightness is 3 times of ordinary street lamp, but also extend the service life of the battery, solar street lamps use cost reduced the countryside.

In addition, the rural solar street lamps mainly has the following several benefits:


1, convenient installation, without complex line, just a cement base fixed;




2, one-time investment, no maintenance costs, need not pay the electricity bills, insurable long-term gains;




3, rural solar street lamps use less than 36 v dc, don't worry about security issues;




4, rural solar street light panels can be used for 25 years, the service life of LED light source can be up to 50000 hours, and its battery can be used 5 -
Seven years;




5, rural solar street light has the characteristics of green, environmental protection, and conform to the requirements of the modern state environmental protection.




6, rural upfront costs relatively large solar street lamps, but later maintenance and management of low cost, small failure rate.




there is no standard pricing rural solar street light, mainly according to the needs of specific configuration.

In addition, the price of the rural solar street lamps mainly composed of the light source of lamps and lanterns, LED power supply and the light pole, that is to say, the key factors of rural solar street light price mainly includes the following aspects:


1, the size design of lamps and lanterns;




2, light source, the power size and brand;




3, brands and wattage of LED power supply;




4, the height of the light pole, material and thickness and other factors.

The personage inside course of study says, the U. S. government deprived of India's exports to the United States duty-free privileges will undermine India's pv exports, but the south Asian countries to launch domestic procurement plan or damaged demand will make up for the manufacturers.






since 1975, according to the GSP (
GSP)

Trade plan, India has been as a developing country enjoys special beneficiary status in the United States.

Traditionally, the United States and Europe has been India's two biggest export market of photovoltaic modules.

However, last week, according to trump the President signed an executive order, the special status of India will end in June 5.

In addition, the current us against CSPV products and household washing machine safeguard measures shall not apply to the regulation of India will also be abolished.


as early as March 4 trump has warned congress this trend, he proposed in his latest executive order for the following reason: & other;

I'm sure, India does not assure us that India will provide an opportunity to enter the Indian market fair and reasonable.
”


Indian industry department responded Sunday, & other;
Unfortunately & throughout;
Make the choice, the United States.

Then India said again, hope solid relations with the United States to the next level.



price advantage breaches trump the move is likely to affect several Indian suppliers.

India component manufacturers Vikram Solar manufacturing operations department and director of the CTO Ivan Saha, said in 2018, 47% of India's Solar products are exported to the United States.


this week, in an interview with PV Tech, Saha, said the news is not surprising.

However, his company had hoped to see is the result of different & ndash;
—
The design of the GSP program help India and the United States.

He thinks that, so far, the plan to promote the growth of India and help solar industry to obtain the market share in the United States.

　　“

However, as the U. S. position, we now want the government to adjust policy, promote solar manufacturers.
”


consultancy Bridges to India, executive director of wrestling Rustagi told PV Tech, & other;

Cost is obviously a major consideration in the photovoltaic products buyers in the United States, as a result, the proposed tax rate of 30% will destroy the Indian manufacturers price advantage compared with other foreign suppliers.
”

　　“

At present, China and Vietnam have been imposed tariffs.

Now, if the tax in India, then we will have to compete.
In my opinion, this is very difficult.
”



new competition Rustagi added: & other;

Europe, including minimum import price policy cancelled all trade tariffs on Chinese imports and measures, using the prosperity of European solar compensate for the loss caused by the United States hopes the new market, at the same time it also makes India components lost cost advantage.
”


India must compete with China, products imported from the United States and other European countries means that India must export components exist & other
Obvious gap & throughout;
。


for Vikram Solar, America's tariffs in Europe's prospects have little impact on the company, because the company is mainly focused on the field of American business and the combination of European business and distribution market, provide different products to both market.
“

Therefore, the solar energy market in the European Union overall regression does not really affect the business.
”

Hope

home anyway, export accounts for only a small part of the India pv production, and all sorts of the Indian government plans to show that, if all goes well, photovoltaic products in the domestic sales have profit potential.
The latest roof, solar pump, and the public sector (
苏共)
The plan requires the use of locally sourced components.

In fact, the amount of CPSU plan for 12 gw, including 2 gw has issued a project subject to tender, are waiting to submit bids.

　　“

We believe that the focus of the Indian manufacturers should be as much sales in India.
”


although CPSU plan 2 gw bid may be possible to speed up the progress of the project, but these projects are the biggest utilities for private use, rather than to sell electricity to the power distribution company, so it is possible that these projects will be according to public access provisions.

In recent months, the bridge of India have open access wrote many articles, solar projects related question involves certain state policy reversal and incentives to cancel.


Rustagi said, & other;

This is one of the biggest challenges facing in the process of plan implementation.
”

Zhongshan solar panels -

Guangdong energy technology co. , LTD. , custom folded solar charging for solar panels, by the United States imported Sunpower solar panels, features: flexible, soft, light weight, small size conversion efficiency as high as 24.
2%.

The


zhongshan solar panel manufacturers -
—

Guangdong energy technology co. , LTD. Customized solar panels for solar charging folding bag, in U. S. imports of solar panels and characteristics: flexible, good flexibility, light weight, small size conversion efficiency as high as 24.
2%.

Mainly for the solar mobile power supply, solar folding bag and solar iot technology provides power supply support.

Compared with ordinary crystalline silicon solar panels with small size, high conversion rate, etc, was welcomed by the majority of users.
The characteristics of the solar panels: (
1)
In the United States imports of solar panels (
2)
Conversion efficiency can reach 20 -
24.
2% (
3)
Weak light sex good, strong stability,
4)
USES the listed companies of polyester and EVA material (
5)
High strength and resistance to deformation printed circuit board (
Glass fiber board)
6. The thinnest efficient solar panels can reach 1.
0 mm, according to the need to customize.
Solar panels production process: 1.
2 solar battery test power.
Cell division 3.
SMT machine automatic placement machine 4.
Using EVA encapsulation.
Polyester, cell, and printed circuit board 5.
Test the power and classify packaging.

If you want to know more information about solar panels, please continue to pay attention to sun yat-sen solar panel manufacturers -
—

Guangdong energy technology co. , LTD or search baidu, 'guangdong energy technology co. , LTD. ' relevant tags: makers of solar panels, solar panels, solar panels, guangdong energy technology co. , LTD

I believe that when many customers first started buying solar street lights, they were very worried about its installation. They often asked our solar street light manufacturers to send technical installation instructors. In fact, the installation of solar street lights is very simple, so you don’t need to ask us. The technicians in the past used to guide the installation, wasting manpower and material resources, only need to find an electrician to complete the installation. In fact, we need to know how to install solar road lights. We must first know what constitutes solar road lights: solar street light poles, solar panels, controllers, batteries, buried boxes (no need for lithium batteries), embedded parts, led lamps. Now I will briefly introduce its installation method.

1. Determine the installation position of the solar road light and make sure that there are no obstructions around
2. Dig a hole according to the size of the basic cage, insert the PC pipe, pour cement, and wait for it to dry naturally.
3. The solar panel should be installed in the south direction, and the direction can be adjusted by screws. The inclination angle of the cantilever of the light pole and the orientation and inclination angle of the solar cell should be coordinated with the direction and angle.
Fourth, use a thin wire to lead the wires from the battery board interface and the led lamp interface, install the led lamp, and tighten the screws. When it is on, connect the negative pole of the battery board, wait for a second, and the light is off, indicating that the solar road light system is normal.

The above is the author's brief introduction to the installation of solar road lights. It may not be very complete. I hope that all purchasers can understand. The main purpose of this article is to tell everyone that the installation of solar road lights is really good. It's simple. Don't worry about buying a solar street light, and you can't install it locally. You can solve the installation problem by yourself, so feel free to buy it.