Guide to Shop DC Solar System in ALLTOP Lighting

2022 government projects adopt 200W-300W all in one Solar Street Light 

The features of this solar street light is an ALL-IN-ONE design. The light engine and battery and

solar panel are built right into the LED fixture. No need for a power source which eliminates the

need for wiring and trenching. Very convenient for installation and long term maintenance.

Durable die casting aluminum fixture for the body structure.

Fully programmable via solar controller and photo control

Built-in battery and solar controller

Advanced new LiFePO4 battery lasts at least 2000 charge cycles and will last three nights

with one day charge

Perfect for street, parks, parking lots, school campuses, etc.

Dimensions(L*W*H):200W 1550*534*174mm

300W 1767*534*174mm

 

 300W Solar Street Light  

      

 

Tips:

1.Installation direction of the solar panel is 5-10 degrees south to west,an angle of 35 degrees with the horizontal place.

2.Please install the solar panel in the sun direction to avoid affecting the power generation efficiency.

3.Please ensure the installation is stable.

Bellow are the photos of positive feedback from customer after installation.Please don’t hesitate to contact us if you have projects need professional lighting solution.

Big but not strong, the current solar lighting industry industry still remains to be further enhance core competence. For solar street lamps factory, expand scale, improve product quality and technology level is the primary task. Only find out the gap with their peers, the pursuit of urban street lamp high starting point planning, high standard design and high quality service, tech support, efficient management, to adhere to and full implementation of the scientific outlook on development as testing the success or failure of the construction and management standards. Solar street lamp manufacturers to improve product technology and strengthen product development, focus on large-scale production to lower prices to compete for replace incandescent light bulbs, energy-saving lamps, market share, at the same time, pay attention to the marketing mix strategy is to break the shackles of LED lighting development and effective strategy for a long time. Solar street lamps manufacturers need to directly experience the museum opened, the manufacturer's marketing terminal into the county, the town of grass-roots units, with a good brand image, good technology, in poverty alleviation and the new rural construction in southwest solar street light project obtained considerable results. Want to learn more industry information or ask price, can call advisory

Most light pole leakage caused by accidents in rainy and wet weather, especially the summer thunderstorm. This was partly due to high temperature in summer road facilities such as running under high temperature and humidity cable insulation breakdown caused by aging light pole leakage easily. Another



most of the light pole leakage caused by accidents in rainy and wet weather, especially the summer thunderstorm. This was partly due to high temperature in summer road facilities such as running under high temperature and humidity cable insulation breakdown caused by aging light pole leakage easily. Less people on the other hand is due to the summer clothes, bare skin easily come into contact with the metal band light pole electric parts, shoes naked human body and the earth formed loop cause accident getting an electric shock, and because of the shoes in the winter and spring were good insulation even rarely cause deaths accident getting an electric shock. Let's talk about detailed solutions:
1, light pole in the cable insulation aging and light pole set fire in general, the standard cable insulation should be able to use not less than 15 years, should be replaced before it is due to the cable. In addition, should make the cable is fixed in the middle of the light pole, not on the wall light pole.
2, electric light source is not qualified as LED light source, the progress of technology, strictly control the light source, the choose and buy for IP65 【 IP65 IP is Ingress Protection, IP rating for electrical equipment enclosure Protection grade of foreign invasion, such as explosion-proof electric appliance, waterproof and dustproof appliances, sources are the standard of the international electrotechnical commission IEC 60529, this standard has been adopted in 2004 to the national standard. 】 Level, can maximum limit reduce accident probability.
3, wire and terminal connection mode of discharge current most with the method of skin wound, the joint resistance is big, poor sealing effect, insulation life short, 3 - 5 years electrical tape package will loose, if there is moisture or immersed in water, which will discharge. This is the most main factors of the light pole charged. Before everyone not value, also have no good method to solve this problem.

Solar street light component wiring must pay attention to the problem? Solar street lamps manufacturer to introduce to you, the main content is as follows:
1. In order to prevent the street lamp power caused by long-term prolapse or pull loose terminal or fall off, solar street light component wiring place must adopt the silicone seal will street lamp wire fixed to the bracket.
　　2. Make street light component line join order to avoid the emergence is negative after the short circuit phenomenon.
　　3. Pay special attention to during the battery connection don't touch the battery terminals and safety palladium, forbidden to battery short circuit, in order to prevent electric shock cannot touch battery is negative.
　　4. In the bottom of the light pole wiring place form a complete set of seal device should be adopted or silica gel seal and pay attention to beautiful.

One of the street lamp is the mainstream gradually use solar street lamps, has been popular used in the new rural construction of road. Solar street lamps mainly by led lamp, solar panels, light pole and lithium battery and controller, we use now led lamp holder,


one of the street lamp is the mainstream gradually use solar street lamps, has been popular used in the new rural construction of road.
solar street lamps mainly by led lamp, solar panels, light pole and a lithium-ion battery and controller, we use now led lamp holder, there are two kinds of forms. One kind is made up of small bulb chip, through the lens of small light, and there's a kind of integrated light source, the bigger of the two. The two are currently in use in the form of at most.
guangdong Australia photoelectric science and technology, as a heritage of the older technology and new technology enterprise, LED street lamps, has a professional technical team and perfect after-sales service, in the near future for the optimization of solar street lights are also going on, for production product that we are serious, please look for the Macao photoelectric, Australia's quality!