Guide to Buy Indoor Light in ALLTOP Lighting

At the beginning of the reform and opening up, when the free market economy was on the rise, in the ancient town of Zhongshan, the lighting lamps were like a spark. In this southern town, the prairie fire, coupled with the holding of the Light Fair, the lighting capital was settled!
A huge lighting industry cluster centered on the ancient town has been formed!
Merchants from all over the country and even all over the world gathered here, and the lighting lamps and lanterns went to the whole country and rushed overseas.
At the end of the last century, there was a reshuffle in the industry. Some enterprises with forward-looking vision in the industry will introduce the channel mode of successful experience in fast-moving consumer goods, household appliances and other industries into the lighting industry, they choose to go out, abandon the original business model, start to set up branches and offices in various provinces and important cities, send business personnel to develop and manage the local market, develop dealers and retailers, the establishment of brand stores and dealerships has quickly established brand awareness and influence with small investment.
The ancient town has also become the birthplace of many brands, with unlimited honor!
Ten years later, the lighting industry ushered in a revolution of its own, that is, LED, a new type of light source revolution. Almost overnight, traditional incandescent lamps and fluorescent lamps became outdated products!
LED has become the mainstream, traditional bosses and new forces compete with each other, and the competition for the market is increasingly fierce!
At the same time, another revolution is also going on. This revolution is characterized by the reversal of the master-slave relationship between factories and users. This is the revolution of e-commerce to traditional business models!
Almost every industry is suffering from the impact of e-commerce! The lighting industry is also deeply affected!
Lighting, while facing its own internal new and old technological revolution and e-commerce, the new and old business model Revolution, risks and opportunities coexist, in this historical environment, it is to put some long-standing problems in the lighting industry under the magnifying glass!
Lighting industry is a very special industry.
Lighting is closely related to people's daily life, life and work, so its market is very extensive, with many market segments such as home, Commerce, Office, industry and landscape, there are hundreds of billions of market scale and tens of thousands of enterprise factories, but few enterprises occupy 1 market share. The market is scattered, although there is no monopoly, however, there are also many disadvantages of free market economy, such as serious homogenization of products! Low price and low quality competition!
In addition, patent protection is almost ineffective for lighting, a non-standard product, which leads to the factory's carelessness and unwillingness to take huge market risks to develop new products. In order to obtain orders, we have to rely on price war to attract attention. Behind the price war, it often means low quality and homogenization. The industry has entered a vicious circle round after round!
Finally wasted resources, hurt users, but also hindered their long-term development!
These should be the deep-seated reasons for the chaos of the industry.
In the current environment, most end users are very eager to buy good products with good quality and low price, and are more eager to buy more valuable products!
Distributors, as a part of product logistics, also have many irreplaceable roles. However, in recent years, they are also facing various problems such as rising operating costs such as rent, labor and advertising, it is also a good product that urgently needs good profits!
Therefore, good products are the cornerstone of the healthy development of the industry. Good products benefit users, dealers and enterprises!
In order to make the lighting industry develop healthily, we must solve the main contradictions in the industry!
However, in the current environment of great development of e-commerce, the main contradiction in the lighting industry is the low attention of end users to the lighting industry, although lighting is something they are very familiar!
Most end users will only buy lamps when decorating, because they usually pay less attention, do not know how to choose lamps, do not understand the importance of lamps and lanterns, and only choose by price, as a result, many times the purchase is improper, which affects the work efficiency, affects the home mood, affects the customer's transaction, and affects the safety!
Although the free market economy is unconstrained and can develop freely, it will also have natural selection and survival of the fittest, but it will also produce serious homogenization, low quality and low price disorderly competition and other drawbacks, therefore, the government's active guidance and regulation are also needed to enable end users to understand the functions and matching skills of lamps and lanterns, so as to enhance their value! Make the industry develop healthily!

Shenzhen big plum sand -

Vanke center indoor lighting engineering 5 terms as award nomination of lighting engineering design units declaration: build international design consultant (shenzhen) co. , LTD. , sharp high lighting electronics (
Shanghai)
Co. , LTD.

Is located in guangdong province shenzhen yantian district big plum sand beach resort vanke center project, land area of 6.

170000 m2, with a total construction area of about 120000 m2.

Vanke center, including meeting center, the hotel and vanke group headquarters office area.

The horizon of the whole building is also known as 'floating'.

Currently building main body has been basically completed, vanke group, the new home of office space has already put into use.

The saturated with vanke, the concept of green building large buildings had applied for the United States green building council issued LEED platinum certification standards and if finally passed, vanke center will become China's first has won the certification of green building.

Vanke's new headquarters by the representatives of the contemporary American architect Steven hall design, are called 'skyscraper' lie, using suspension cable, steel structure of large span composite structure, rather then cross over the skyscrapers, built on the bridge pier.

If will it stand up, and the United States the Empire State Building almost high.

60000 square meters of building base, in addition to the eight support theme of traffic nuclear, overall impending, can still wind, wind circulation, the maximum maximize landscape planting area, and fully open to the public.

The floor space is introduced into refined sunken courtyard, rich artificial water system, as the green and gentle slope, rich three-dimensional landscape will jointly build up a natural and comfortable environment.

Reinforced concrete buildings hovering over the 'graffiti' sea garden, as if they once floats on the high sea, now that the sea has retreated, leaving them standing on the base of like coral.

Vanke center attributes of green building is not only reflected on the ground greening, the integration of a large amount of energy conservation and environmental protection technology of green building everywhere saturated with energy conservation and environmental protection of the ecological concept.

Inside the building as a creature, skin is 'breathing' translucent reinforced lightweight carbon fiber, the metope of each direction are annual solar energy collection quantity calculation, the shutter control and Angle, ensure the lighting and temperature, relative to the same type building energy efficiency 75%, use of renewable materials, environmental protection, building locally within 500 kilometres of production.

Vanke center ground artificial water system of open space and green space green water will come from the rainwater collection processing and construction of water processing, the whole building of water consumption is expected to save half.

And through the widely application of solar energy, the building power generating capacity is expected to reach 280000 degrees.

According to the output into a calculation, through the use of solar energy, vanke center of standard coal can be saved about 110 a year.
268, 82 tons of carbon dioxide.
39 tons.

In addition, the construction of the indoor air conditioning used the ice storage cold system, namely in electricity trough ice, ice refrigeration is used in the peak season, peak by cutting can reduce the capacitance of the city of the pressure, reduce the waste of electricity.

Under the premise of meet the LEED certification for the employees to build an intelligent, energy saving, comfortable, high quality light environment.

Light environment illumination level, brightness distribution, intensity of illumination uniformity, the influence of various factors such as the stability of the intensity of illumination, these factors is closely related to lighting control.

A good lighting control system, not only can be related to the electrical control in the construction of visual environment integration as a control monitoring system, and comprehensive consideration in the building lighting related to the people of various environmental factors, to provide maximum comfortable light environment under the premise of saving energy.

Vanke's new headquarters will be the future of green building symbols, and vanke practice of green environmental protection, building energy conservation is a reflect.

New rural construction to buy 6 m solar street lights, we are consulting the lithium electricity solar street lamps in numerous and complicated, lead-acid battery and gel battery we have forgotten, and the new rural lithium battery solar street lamps become the new darling.

In recent years as the solar street light skills continuously lift


the new rural construction and purchase a 6 meters long solar street light.

We are all in consulting lithium-ion solar street light, lead acid battery and gel battery.

We have forgotten them, and the new rural lithium-ion solar street light has become the new darling.

In recent years, with the constant improvement of the solar street light technology, the development of rural solar street light technology is more and more mature, the price of solar street light is becoming more and more cheap, lithium battery of solar street light price is also very common.

Choose new countryside in the lithium battery solar street lamps have many advantages.

Let's take a look at the following example: how many kinds of traffic lights 1.

It's obvious that rural lithium battery solar street lamp installation is very simple, can be directly hung on telegraph poles, eliminating the tedious digging and wiring procedures.
2.

Lithium-ion batteries do not contain harmful substances, have certain effect to the environment.

3, long service life and live longer than lead acid battery and gel battery.

Cycle life of lithium batteries can reach deep circulation of more than 300 times, solar street light light circulation utilization of up to 2000 times, than the life of the gel battery 2 times more than long.
4.

Lithium battery use safety, light weight, convenient installation.

Solar street lamps manufacturers have their own light pole factory, lamp holder workshop, panels, workshop and workshop controller.

In 2017, is an obvious photovoltaic panel industry growth inflection point, industry fundamentals significantly increased.

During the National Energy Administration said much starker choices-and graver consequences-in photovoltaic capacity planning, photovoltaic installations target is around 225 gw in 2020.

Is expected, in the second half of the domestic




in 2017, is an obvious photovoltaic panel industry growth inflection point, industry fundamentals significantly increased.

In the National Energy Administration said much starker choices-and graver consequences-in & throughout;

During the pv installed plan, photovoltaic installations target is around 225 gw in 2020.

Is expected, in the second half of the domestic photovoltaic new power to the 12 gw in the second half of 2016 to 14 - on the basis of growth

16 gigawatts (gw), which is expected to promote the new power for the whole year is close to 40 gigawatts (gw).


environmental protection new energy photovoltaic (pv) in the process of China's development, won the support of a number of policy, China has now occupy the leading position in the field of global pv.

Strong growth over the past five years, our pv industry, independent hold up the new global energy markets throughout a day &;
。


to August, 2017, our pv installed more than 100 million kw, was finished ahead of much starker choices-and graver consequences-in & throughout;
Planning objectives.

According to southern daily previously reported, the global solar photovoltaic power generation capacity by 2012 in 100.
5 gw growth in 2016 to 306.
5 gw, with an average annual compound growth rate of up to 32.
15%.

And from the point of the global photovoltaic (pv) power generation of new power capacity, China pv new power capacity in 2016 to 34.
54 gigawatts (gw), continue to lead the global pv market.


in the past five years, China pv is in rugged & throughout;

Found in confidence, and step into the fast lane of large-scale development, thus realize smoothly from followers throughout the &;
To the leading & throughout;
The role of the conversion.

According to China energy news previously reported, the scale, in the first half of 2017, 11 polysilicon production.
50000 tons, up 21%;

Silicon wafer production 36 gigawatts (gw), up 20%;

Cell production 32 gw, year-on-year growth of 28%;

Component production more than 34 gigawatts (gw), 25 year-on-year growth.
More than 9%.

Among them, batteries, silicon wafer production for many years to keep the world.


under the policy frequently waft of warm wind, photovoltaic industry in China has been a steady rise in scale, improve technical level.

In China, have a every hour be installed solar panels on the size of a football stadium.

The rapid development of distributed photovoltaic is undoubtedly the most bright spot.

Ground power station and distributed throughout a minus one increases the &;

, reflecting the important structural changes are happening in photovoltaic industry in our country, from simply the pursuit of size, to the pursuit of quality, efficiency.

Because the area of the installation of a distributed system is limited, high capacity per unit area of the component will be popular.


in the next few years the development of the center of gravity will be focused on the distributed.

Distributed photovoltaic new power in the first half of 2017 to 7 gw, year-on-year growth of nearly three times, in a distributed throughout the southeast in the region take the lead in tuyere &;
, and extended to northeast China and other regions.

Domestic institutions, our country has up to 50 million roof, if 20% of the roof to install photovoltaic power generation system, then to every 3 kw of installed capacity to conservative estimates, the size can be up to 30 gw.


at the same time, China pv industry adversity reborn drives the global pv market pattern have changed dramatically: photovoltaic market mainly in Europe in the past, but since 2016, Asia has become the world's largest photovoltaic market.

In the expert opinion, China is the world's largest photovoltaic application market, but production share proportion bigger, therefore, to expand overseas market landscape & throughout;
Is the inevitable choice.

In recent years, India, the United States, the Middle East, Africa and other regions pv demand is growing rapidly, and become our pv enterprises overseas distribution point.


China photovoltaic threatening the excessive reliance on a single region market pattern has gone forever.
All the way with area & throughout;

Countries along the initiative in the rapid fall to the ground to take root, China pv enterprises are in more broad prospects for the development of lighting solar street light.
Photovoltaic (pv) is the area along the way & throughout;

Initiative of the key areas of cooperation, with ever increasing competitiveness, China's new energy companies are vigorously explore overseas markets, speed up the global business layout.

The Internet LED lighting market has huge business opportunities and broad development space.
The application of LED lighting lamps has developed from outdoor landscape lighting LED to indoor lighting application.
According to analysis, the development of LED Indoor lighting will have an exponential growth trend in the next five years.
In 2011, its output value will reach tens of billions of dollars.
In particular, the EU took the lead in implementing the plan to ban incandescent lamps in 2009, and the issue of energy conservation has attracted much attention, creating huge market opportunities and optimistic prospects for LED indoor lighting.
The development of high-power LED lighting depends on two elements: one is the chip itself;
The second is lighting technology, including heat dissipation, optics and driving.
The first is the chip. At present, the key to the development of LED chip technology lies in the substrate material and epitaxial growth technology.
Substrate materials have developed from traditional sapphire materials, silicon and silicon carbide to new materials such as zinc oxide and gallium nitride.
Whether it is a high-power chip for focused lighting and overall lighting, or a low-power chip for decorative lighting and some simple auxiliary lighting, the key to technology upgrading is how to develop more efficient and stable chips.
In just a few years, LED has made great breakthroughs in light efficiency with the help of a series of technical improvements including chip structure, surface coarsening and multi-quantum well structure design.
Thin film chip technology is the core technology in the production of ultra-bright LED chips. It can reduce the light output loss on each side and output more than 97 light from the front with the help of the reflection surface at the bottom.
This not only significantly improves the luminous efficiency of LED, but also creates superior convenient conditions for lens design.
In fact, since the development of LED lighting lamps, people have been paying attention to its service life. If only using LED components with low thermal resistance fails to build a good heat dissipation system for lamp devices, however, only by effectively reducing the thermal resistance from the PN node to the surrounding environment can the PN node temperature of the LED be greatly reduced, and the goal of prolonging the service life of LED lamps and increasing the actual luminous flux is successfully achieved.
Unlike ordinary traditional lamps, printed circuit board is not only the power supply carrier of LED, but also the heat dissipation carrier of LED, so the heat dissipation design of heat sink and printed circuit board is very important.
In addition, lamp manufacturers must also consider factors such as the quality, thickness and size of heat dissipation materials and the handling and connection of heat dissipation interfaces.
In terms of optical design of LED lighting lamps, compared with traditional lamps, orientation and point light source are the typical characteristics of LED and the key points of optical design of lamps.
Through the binary optical design of LED, LED lamps can achieve better light distribution curve.
Just as the light of indoor lighting with large LED lighting market needs to be very bright at present, high light transmittance lampshade can be used to improve light extraction efficiency.
Or the light guide plate technology is applied to the lamp, thus changing the LED point light source to the surface light source, which can not only improve the light distribution uniformity of the lamp, but also prevent glare.
It can also be used with some condensing lenses or reflectors to highlight the condensing effect of illuminated objects to achieve real ideal optical effects.
The technical challenges of high-power LED lighting, even though LED has achieved satisfactory performance in indoor key lighting and decorative lighting applications, it still faces many challenges in general lighting and atmosphere lighting applications, including initial cost, light efficiency when color temperature is low, color rendering index and system reliability, etc.
Cost is a relatively sensitive factor in indoor lighting, especially in home lighting applications.
Although there are more and more LED lamp models and the luminous efficiency is constantly improving, the problem of high price still exists.
However, when the price of LED light source decreases and the overall design of the system is optimized, the total cost will inevitably decrease.
When LED lamps increase the light efficiency at low color temperature, the low color temperature below 4,000K is usually indoor home lighting. Warm white light makes the whole environment warmer and more relaxed;
The cold white light gives a clean, efficient and bright feeling, which is more suitable for office and outdoor lighting.
LED lamps can prolong the service life and improve the reliability of the system.
In general lighting applications, the overall efficiency, service life and reliability of LED must be improved through system optimization.
LED light source: compact and efficient, with a variety of colors and output power to choose from.
Power Conversion: efficiently convert alternating current, batteries and other power supplies into safe low voltage and constant current power supplies.
Control and drive: use electronic circuit to realize constant current drive and control of LED.
Thermal management: to achieve a longer service life, it is very important to control the temperature of LED nodes, and heat dissipation analysis is also indispensable.
Optical elements: Lens, reflector or light guide plate material is a necessary optical element to focus light on the target area.
With the rapid development of LED technology and the gradual improvement of LED luminous efficiency, the application of LED will be more and more extensive.
Especially with the increasingly serious shortage of sexual energy, people are paying more and more attention to the development prospect of LED in the lighting market. LED will be a potential light source to replace incandescent lamp, tungsten lamp and fluorescent lamp.
In addition, in the design of indoor lamps, LED will tend to be energy-saving, humanized and artistic.