Guide to Buy Indoor Garden Lamp in ALLTOP Lighting

( 1) Compares on the service life of the LED is a semiconductor diode, light source theory of the life is very long ( Premise is to meet within the scope of the provisions of section temperature, L70 droop standards) Lamps and lanterns, but one's whole life is not simple light life, lamps and lanterns also includes lens


( 1) Life is led lamp is a semiconductor diode, the light source theory of life is very long ( As long as the prescribed temperature range L70 light attenuation standard) 。 However, lamp's whole life is not just the life of the light source, light also includes the influence of the lens. Therefore, finally the life of the lamp should be limited in all chy-tech pieces the shortest one. When the flux decay to 30%, life can reach 50000 hours, and the life of the metal halide lamp is 6000 - 12000 hours, high pressure sodium lamp life 20000 hours. ( 2) The comparison of the light illumination (1) color rendering index led white light: (1) led color temperature is 3500 - 7 million; (2) the color rendering index for 80 ~ 93. The traditional high pressure sodium lamp: (1) high pressure sodium lamp color temperature is 2000 - 2. 5 million; ( 2) Color rendering index between 20 and 30. According to the comparison results above, it can be seen that high pressure sodium lamp low color rendering index, color performance is poor, poor to color reducibility of the object itself, is not conducive to determine the depth of the surrounding environment. Led light source with high color rendering index and good color rendering performance, can restore the actual color of the object, but the white light is cold. Looking at high pressure sodium lamp, it is more close to natural light. At present, the led lamp luminous efficiency is slightly better than sodium lamp. With the development of light emitting diode technology and mature, will greatly improve the luminous efficiency of lamps and lanterns. (2) the dimming function: light emitting diode lamps and lanterns has perfect dimming function. Light emitting diode lamp light output is proportional to the current work, so can reduce the current to adjust the light. In addition, because the frequent switching of light emitting diode lamp will not cause too much damage to led lamp, so can be controlled by pulse width adjustment to dim the light emitting diode lamp, by adjusting the voltage than empty and working frequency can effectively adjust the luminous intensity of led lamp. ( 3) Light utilization rate of the luminous flux, luminance LED light loss is minimal. Different from the traditional light source, led lamp is in the form of light. High pressure sodium lamp is a glowing light between all empty, so it is necessary to a half empty between the emergent light between the direction of change for the other half empty internal reflector reflects, at the same time inevitably absorbs light and stop the light source itself. However, using light emitting diode lamp as light source in this area will not cause any loss, and light utilization rate is higher than high pressure nano light. At present, the led lamp is 65 - 100 lumens per watt, and can achieve 140 lumens/watt high pressure sodium lamp. High pressure sodium lamp spectrum on yellow, color temperature is 2000 - 2500 k, fog strong penetrability. A big problem is that sodium sodium lamp lighting continuity is very poor. When sodium lamp is working, the temperature of the lamp cavity must be more than 150 degrees, and the temperature of the led lamp is 30% of the high pressure sodium lamp. In non-working state, a lot of dust and insects is due to the negative pressure suction back, have greatly affected the sodium lamp glowing effect and service life. The light emitting diode is relatively stable. ( 4) The comparison of energy saving and environmental protection LED lights high efficiency and energy saving, low power consumption. White light-emitting diodes (leds) power consumption is only 1/10 of incandescent lamp and energy-saving lamp of a quarter. The light emitting diode lamp light source does not contain harmful metallic mercury. High pressure sodium lamp light source contains metallic mercury and sodium metal ( After electrify the mercury vapor and sodium vapor) , short service life ( Compared with the light emitting diode) And subsequent disposal of environmental pollution. Leds lamps and lanterns is good shock resistance, convenient transportation. Solid-state encapsulation belongs to cold light source type. So the transportation and installation is very convenient.

Since 2010, attention has been paid to the manufacture and sales of LED single products. When Shi Fu LED Yulan bubble just came out, we predicted that it would set off a revolution in the field of crystal lamps. Later facts also proved our judgment. Until now, many luxurious crystal chandeliers still use LED candle lamps or magnolia bulbs. LED ceiling lamps are also a single item that we have been paying attention to. In 2013, this kind of product began to show explosive growth, which can be said to be unique in the field of LED home lighting. Since 2013, this single item has been sold by the LED family. According to the hot market of ceiling lamps, senior people in the industry have concluded that the LED home lighting era is coming. In other words, LED products have been transferred from the National ten-city outdoor lighting to indoor lighting. This is an important turning point, marking that LED has really ushered in its own spring. The flower bud that brought this spring is the LED ceiling lamp. Just as everyone started the ceiling light project, some companies began to innovate in various fields. Such as lamp panel, lampshade, drive, dimming, intelligent remote control, etc. The result of technological innovation is that the price has come down, the quality has risen, and the cost performance has come out. The ceiling lamp market is gradually becoming rational. For manufacturers, the maximization of interests is an eternal pursuit. Now, the cost of ceiling lamps is basically transparent, and the price is transparent. Everyone knows how many percentage points the manufacturers earn and how many percentage points the dealers earn. There is not much room to make a fuss about the ceiling lamp itself. Therefore, in addition to the ceiling lamp products, it has become the choice of some smart manufacturers. We know that in the 19th century when the Western United States was in a gold rush, ninety-nine people chose to dig for gold, but not everyone made a lot of money. Many people did not find gold, but their lives were lost. However, a small number of jeans made a big profit and became the winner. Now the cost and profit of ceiling lamps are close to the bottom. To make money, you must make a fuss about other aspects. Such as management, packaging, etc. At present, there are several procedures for packaging in general enterprises, such as sorting, sorting, plastic molding, box loading, etc. It takes a lot of labor and electricity. However, there is no guarantee that there will be no damage during transportation. Can we use a more advanced method to save these procedures, make packaging more convenient and labor-saving, and reduce costs through packaging, which is also a method to increase corporate profits. The author has recently seen a patent for the packaging of ceiling lamps. It is convenient and practical to directly link the lamp body and the paper box with a simple ring without sealing and plastic. Tell the author, this kind of packaging has saved even the plastic machine, saving a lot of labor and work links. It goes without saying that the cost of packaging has dropped, the number of manual links has decreased, and the profit has definitely gone up. Lu You said: If you want to learn poetry, kung fu is outside the poem. This is the truth.

At present, the country's cities have installed on the street, even in remote rural roads are the existence of a street lamp. Yes, street lamp has become the indispensable part of people's life. Street light the emergence of the rich people's nightlife,


at present, our country all cities are equipped with lights, even in remote rural roads. Yes, the street lamp has become an indispensable part of people's life. Street light the emergence of the rich people's nightlife, convenient for the transportation of people, to ensure the safety of the people. Today there are a lot of street lamp manufacturers on the market, but also has many bad manufacturers together. At this point, we need our judgment to select a high quality of street lamp manufacturers. Next, the editor will teach you some choice high quality street lamp manufacturers techniques. First, understand the street lamp manufacturers reputation evaluation to word of mouth for street lamp manufacturers have a general understanding, through the Internet or the local people to query and inquired about their actual reputation evaluation, word of mouth manufacturers will have a high quality after-sale service and products. Second, to feel the street lamp manufacturers service attitude:

we must choose a better service attitude too street lamp manufacturers, purchasing experience will also increase a lot. You can through the field investigation or chat to feel it. Service attitude good manufacturers in certain aspects of you have any question. They can effectively communicate with you, to reduce unnecessary trouble. Three, choose strength street lamp manufacturers:

we must choose a powerful solar street lamp manufacturers to buy the product, to ensure that we buy good quality of the products. We can through their qualifications and the manufacturer to determine the size of their strength. Street light enriched people's night life, guaranteed the people's travel security. It is the carrier of urban memory. Due to the street lamp manufacturers on the market are numerous, their level of qualification and strength also have very big difference, so the different quality of the lamps in the street lamp manufacturers nature is not balanced, this also led to the different lights price. So, if you want to select a high quality of street lamp manufacturers, you must consider many factors.

The led solar garden light has the characteristics of energy saving, environmental protection, long life and high brightness. u003cbru003e u003cbru003eThe specific functions are as follows: u003cbru003eCharacteristics of solar led garden lights: u003cbru003e1. Energy-saving of solar led garden lights: Solar energy photoelectric conversion provides electricity, which is inexhaustible and inexhaustible. u003cbru003e2. Solar 100 led garden light environmental protection: no pollution, no noise, no radiation. u003cbru003e3. Solar LED street light safety: No accidents such as electric shock or fire. u003cbru003e4. Solar led garden light garden light is convenient: the installation is simple, no need to wire or 'open the belly' to dig the ground construction, and there is no concern about power cuts. u003cbru003e5. Long life of the lamp holder of solar led garden light: The product has high technology content, the control system and accessories are international brands, intelligent design, and reliable quality. u003cbru003e6. High grade of the lamp holder of solar led garden lights: scientific and technological products, green energy, and the users attach importance to science and technology, improve the green image and upgrade the grade. u003cbru003e u003cbru003e 7. Low investment in LED street lights: A one-time investment is equivalent to AC power (the AC power investment is the sum of power transformation, power input, control box, cables, engineering, etc.), one-time investment, long-term use. u003cbru003e u003cbru003e u003cbru003e u003cbru003e Zhongshan Lighting Appliance Co., Ltd. is located in the ancient town of Zhongshan, which is known as the 'Lamp Capital of China'. The company has built a modern standard factory building of more than 3,000 square meters and a large outdoor exhibition hall. Street lamps and various street lamp supporting equipment products, a large-scale enterprise integrating design, development, retail, wholesale, and engineering. The company is newly upgraded to a general taxpayer and can issue value-added tax invoices. u003cbru003e u003cbru003e u003cbru003e Since the establishment of the company, in line with the tenet of 'service first, integrity-based, Real estate companies, squares, Biewang District and other places have received unanimous praise and welcome from government departments and real estate developers, such as all provinces and cities, street light stations, electric power bureaus, and landscape bureaus across the country. u003cbru003e u003cbru003e u003cbru003e The website of the street light company www. is upgraded and optimized every year! The website covers the full range of functions such as brand introduction, new product online, news information, engineering cases, and contact addresses. It is worth mentioning that the company adopts simple enterprise software system Management, so that new and old customers can enter our website at any time at home, at work, or on business trips to learn about the latest order production, the latest development of the company, the latest products, etc., so that your street lights are like production at home!

Every manufacturer is doing direct sales, especially in the LED lighting industry. Before the products are sold, many small manufacturers will promise this to their customers, such as: same day delivery, annual warranty, renewal within the year, *the key is some Small manufacturers will not have problems during the year. Therefore, in the LED light industry, what customers worry about is the manufacturer’s qualification, after-sales service, and response speed.
Today, a friend who opened a factory approached me and said that their LED factory lights were broken and asked if we could help them repair them. I asked him how long it took him. He said that it took less than a year for our technology Tell him, *Why don’t you ask us for repairs, because the factory lights he bought are guaranteed for three years, and the manufacturers are free of charge within three years. There is no need to pay this fee by himself and ask him to find the manufacturer who sells his LED factory lights. . However, the actual situation is that he said that the manufacturer can no longer be contacted. *Later, we sent a technician to bring a few workers to the scene to help them repair the lamps, but fortunately, it did not affect their normal work.
Serious problems in the LED explosion-proof lamp industry! ! ! ! Serious problems in the LED explosion-proof lamp industry! ! ! ! Serious problems in the LED explosion-proof lamp industry! ! ! ! Serious problems in the LED explosion-proof lamp industry! ! ! ! Serious problems in the LED explosion-proof lamp industry! ! ! !
The status quo of the LED lamp industry is that there are many small domestic companies, especially in Guangdong. One person or several people are also a company. When customers want to buy LED lamp products, they promise to deliver the goods on the same day. Or day delivery; good after-sales service, five-year warranty, you must know that the complete production and testing process is more than a day when the LED light source materials are complete. The reasons for such a promise are:

() Zhongshan, Guangdong is a distribution center for LED accessories. The industry chain is very complete. It can be said that when you go to the street, every family sells LED accessories.

() Many small companies can completely achieve zero inventory, a few computers with one network cable, open an Alibaba shop or a website, you can receive orders from domestic

() After receiving the order, go to the market to buy accessories, come back to assemble it, and ship it on the same day.

And many small companies may not actually register the company themselves. Some individuals will hang up under a large company as a salesperson, or help them stand on the counter in a large company’s store, and pay more than 1,000 to the large company a month. Some of them simply accept orders from China directly under the name of a large company.

This will lead to customer cases like the above factory. The salesperson cannot be found in the lamp in less than a year. The reason for the failure must be that the salesperson and other customers have quality problems with their lamps. The phone number was changed and another company was used to do business. Even if the contract was signed for the warranty year, it was just a blank sheet of paper. Our lighting factory group is different. Our lamps are all equipped with brick-and-mortar technology. There are only three brands. The factory can be more than 10,000 square meters and can be inspected on the spot. Customers are welcome to come to inspect the factory. Sales representative Zhou Wenbiao QQ//./