ALLTOP Lighting's Indoor Uplighters

As we all know, LED lamp has been favored by electronic engineers for its high reliability, easy control and small volume since its birth. The first rise is the electronic device indicator light, and then gradually enter the signal indicator light such as traffic red, green light and other occasions. However, due to the low brightness of the early LED lights, the low heat conversion rate, and the high price, the general public is not familiar with it. Commercial applications are also limited to non-mainstream lighting occasions such as building contour decoration and decorative lights. In recent years, with the improvement of the thermal energy conversion efficiency of LED lamps, the brightness has been greatly improved and the price has been greatly reduced, the market has begun to recognize the lighting of LED lamps. As a new type of lighting lamp, LED lamps have a long service life, low power consumption and high brightness have gradually become the new market. [align = center][img] /uploadpic/news/201212170850202. jpg. jpg [/img][/align] LED industry: commercial indoor lighting needs to be broken. Based on the analysis of LED lamp life and power consumption, LED indoor lighting compared with traditional equivalent lamps, LED bulb lamps, LED ceiling lamps, LED downlights, the use cost of LED soft light bars has been significantly lower than that of traditional lighting fixtures. In 2012, the reduction of the cost of LED chips and the development of technology will increase the efficiency advantage of LED lighting, thus starting to send out a strong intention to declare war on traditional lighting. Compared with traditional lamps, LED lamps have stronger plasticity and can not be limited to the design of traditional lamps. Due to the small volume of LED lamp beads, they can be very useful in various designs suitable for use environment. For example, LED downlights, we can make round traditional lamps, squares, irregular shapes, and panel lamps with a thickness of only 9 MM, these are beyond the reach of traditional lamps. LED lights are easier to integrate and intelligently control. Compared with traditional lamps, LED lamps realize dimming, which is much simpler than traditional lamps. Simply speaking, 0- 100 dimming, no stroboscopic, no limit continuous dimming. More intelligent, online control can be realized through DMX512, and the brightness and darkness of LED lamps, or running water changes or various dynamic changes can be randomly controlled according to the dynamic effect to be realized. However, it is relatively more difficult for traditional lamps to realize dynamic changes. At present, commercial lighting should consider more about human experience design, what kind of environment, what color and what color temperature light source to achieve the designer's original intention. For example, jewelry lighting counters generally use LED jewelry cabinet lights, and platinum counter areas use 7000- The 8000K bright white LED light source illuminates the entire platinum jewelry product itself, reflecting the product's whiter and brighter elegance, while the gold product uses LED color temperature light source 3500- The 3800K warm white light source sets off the magnificent and graceful features of the product. Jewelry lighting counter has become a substitute for traditional fluorescent lamps due to its small size, small luminous angle and higher luminous efficiency. Different business environments, different shopping experiences, higher and higher requirements for lighting angle design and color temperature are incomparable to traditional lamps, such as LED floodlights, LED spotlights, the appearance of LED downlights makes all this easier to realize. The increasing luminous efficiency and the decreasing price of LED downlights have sounded the door to commercial lighting. At present, commercial lighting mostly adopts traditional energy-saving lamps. Apart from mercury pollution, energy-saving lamps are bulky, occupying a large space and not beautiful. When the entire power supply voltage is unstable, downlights are prone to flickering. The integrated design of LED Downlight light source and shell adopts Milky White or atomized mask embedded inside the ceiling and integrated with the ceiling, with beautiful and high-grade appearance and uniform light source. The LED power supply adopts constant current design, the light source always maintains consistent illuminance without being limited by external voltage changes. With the improvement of LED technology, the above advantages are improving day by day, providing reliable technical guarantee for LED lighting to enter commercial lighting. The introduction of LED industry standards is also being stepped up. According to internal sources, LED industry standards will be introduced in 2013, and relevant standards such as LED lighting interfaces and illuminance standards will be announced. LED commercial lighting is gaining momentum and is becoming more and more clear. Shanghai Shengmei Electronic Technology Co. , Ltd. 's foreign orders shrank by 30 in 2012, while domestic indoor lighting orders increased by 60- 70, most of them are energy-saving renovation projects and new commercial club projects. LED lamp enterprises have begun to enjoy the dividends brought by energy conservation. The development of every emerging industry has to go through the process of starting, developing, maturing and declining. The LED indoor lighting industry is at the stage of industry development, and it is bound to be inferior and excellent, the coexistence of essence and dross, the elimination of wuwu and the continuous innovation of technology, LED indoor lighting can become mature and recognized.

Under zaha hadid architects recently completed at Manchester art gallery of indoor concert hall. Installed at home playing johann Sebastian Bach's music, is now part of the Manchester international festival. Vortex fabric cover indoor steel structure, the space of sculpture and visual reaction of the complex relationship of Bach's harmony.


this case from under architects: designed to improve the diversity of Bach's works through the coordination of the structure of the integration of formal logic. A single continuous fabric hovering around itself, create the cocoon layer space, make the liquidity of performers and audience in close space.


the band itself contains a translucent fabric diaphragm joints connecting the internal steel structure suspended from the ceiling. Undulate surface of the fabric appearance changing rhythm, stretching across the internal structure. This highly stretched between the shell of the appearance, on the outside of the ribbons and blowing effect of soft fabric same with inside of the band. Light acrylic acoustic panel hanging over the stage, with sound reflection and transmission, and the rest of the vision is difficult to detect the internal fabric diaphragm.


editor: Sophy

Kingkey 100 is located in shenzhen luohu financial and cultural center, as the old city reconstruction project, funds raised center building is shaped like a fountain and waterfalls, China is experiencing unprecedented growth and yu kingkey group, the steady development, to create the first-class enterprise concept, after the completion will be the tallest building in shenzhen, is also one of the tallest buildings in the world at present. Dongguan Kingsun Optoelectronic Co. , ltd. to undertake all the lighting engineering design, become the first domestic the whole building from the inside out a large number of classic case application of green environmental protection LED lamps and lanterns.

LED is known as the fourth generation of lighting source, energy saving, environmental protection and long life, small volume, no ultraviolet and infrared spectrum, no heat, no radiation, glare small, cold light source, can safely touch, belongs to typical green lighting source. Widely used in all sorts of equipment, according to the instructions, in adornment, back light source applications at the same time also made a breakthrough development. Now some countries vigorously into the LED field, in the general lighting and urban landscape lighting, public and commercial lighting and other fields has achieved good results. In recent years, some developed countries such as Europe and the United States there was intense competition around LED the development of the technology competition. Energy conservation is an important issue facing the future of all mankind, in the lighting field, the application of LED products are attracting the attention of the world, is the future development trend. LED lighting lamps and lanterns has many unique advantages, more in line with the 'low carbon' and 'energy saving' concept, and with the technical progress and application of the LED to accelerate, LED lamps and lanterns into is the trend of The Times, with this new light source of lamps and lanterns design will become the mainstream of the next lighting lamps and lanterns design.

the research background, lamps and lanterns design
the lighting of lamps and lanterns to the history of human development has brought the unprecedented breakthrough, not only make human get rid of the dark, but also to speed up the development of human progress. With the development and progress of science and technology, people grasp of the electrical knowledge more and more mature, and then also gradually appear all sorts of lamps and lanterns, from the original oil lamp to incandescent lamp, halogen tungsten lamp, and now the fluorescent lamp, high pressure mercury lamp, metal halide lamp and so on. In brief, along with the advance of social development, for the development of the lamps and lanterns lighting light source is also constantly changes, resulting in the design of lamps and lanterns also along with the development of the source of innovation and continuous change, make people's life more colorful.
after a long time, the development of lamps and lanterns to this day, it not only provides human beings with lighting function, meet the needs of the people's life, more important is people's classic design out many beautiful and practical product of lamps and lanterns, improved people's lives, promote the development of economic and social culture. With the improvement of science and technology level, as well as the modelling of lamps and lanterns design provides a powerful material and technical support. Especially the emergence of the LED lamps and lanterns design into a new world of change. LED the emergence of will bring great challenge to incandescent lamp and fluorescent lamp, is considered to be the next generation of highly efficient green lighting light source.
2, the current situation of the LED interior lighting design
domestic and international numerous manufacturers is to seize the opportunity, to grab a place, a positive investment, and development of LED lamps and lanterns. But the LED as a new light source, and itself is constantly update and development. People have light ability still has not reached perfection, such as color temperature, cooling, cost and so on a series of problems, and then the light source of lamps and lanterns design also is still in the stage of development.
　　1. The domestic status quo
the prevalence of domestic LED indoor lighting lamps and lanterns is not very high, but the kinds of indoor lighting, LED lamps and lanterns is divided into form at first, have LED lamp, LED absorb dome light, LED lamp, LED tube light, LED lamps, etc. Shipments of larger mainly LED desk lamp and dome light. The LED desk lamp, in particular, for such design also is more, the style is more abundant. Thus derived the lamp that shield an eye, portable small desk lamp, rechargeable single lamp, etc. Price, the price of the domestic LED ordinary illumination lamps and lanterns is cheaper than foreign brands. Most are smaller power leds, this kind of small power LED can avoid heat dissipation problem, but also brings the LED luminous efficiency cannot meet people's needs for normal use. Part of a larger power LED lamps and lanterns is not deal with the problem such as heat dissipation, dazzling, can cause aging is accelerated, lamps and lanterns people physical discomfort, etc. At the same time the design of the LED lamps and lanterns is not novel creative, basically adopts the design characteristics of the common lamps and lanterns. Domestic LED lamps and lanterns of lamps and lanterns manufacturer mainly focus on the cost control, and product quality for LED lamps and LED lamps and lanterns design originality and don't have much attention, blindly pursue the benefits of LED lamps and lanterns, ignored the superior characteristics of LED technology, no more emphasis on the design of the LED lamps and lanterns, to a certain extent caused the churning out, doesn't really make good use of the characteristics of new LED light source. Just on the basis of the emphasis on energy-saving LED lamps and lanterns, will change for the LED light source the light source of lamps and lanterns, traditional structure of the other and not to change too much, no other more innovation on the design of lamps and lanterns.
　　2. Abroad status
LED lamps and lanterns is relative to the domestic LED lamps and lanterns, to explore the design of the LED lamps and lanterns more positive. Because the LED technology is still in development, there is no formation of the corresponding technical standards, it caused a lot of uncertain factors for the design of lamps and lanterns. In recent two years, there are many company launched a new LED lamps and lanterns, released its product metrics, is still in some aspects and expectations, there is a big gap in the field of lighting is mainly in terms of price, heat dissipation and color temperature. In life, each manufacturer also produced no light attenuation test conclusion, the basic service life is estimated. The temperature rise will give white LED color temperate to great influence, therefore in the high power white LED lamps and lanterns has equipped with cooling device. But the design of lamps and lanterns is now developing in the direction of the beautiful and practical, with the continuous development of LED technology and innovation, in the future of the LED lamps and lanterns design must get rid of the use of heat dissipation accessories.

put



zhongyan net

【BFC 】LED explosion-proof floodlight special lamps for indoor and outdoor operations


【BFC 】Explosion-proof LED floodlight meets the needs of fixed lighting in flammable and explosive places and related roads, indoor and outdoor operations and construction sites, and can work safely in flammable and explosive places.


【BFC 】Technical parameters:


Explosion-proof mark: ExdIIBT/T; rated voltage: V/Hz; rated power: W; light source type: LED; insulation class: I; anti-corrosion class: WF; enclosure protection class: IP; inlet thread: G/ '; Lead-in cable: φ~φmm; Dimensions (mm): **; Total weight: .kg.


. Meet the requirements of the * new explosion-proof lamps, and can work safely and reliably in flammable and explosive hazardous locations.


.Using high-efficiency and energy-saving LED as the light source, the light efficiency is high, and the life span is up to hours.


.The lamp body is made of light alloy material, which has high strength, strong corrosion resistance and good impact resistance.


.The transparent parts are made of high-temperature-resistant special toughened glass, which expands the heat dissipation space, reduces the temperature rise and improves the life of the bulb.


.The surface of the lamp adopts the latest spraying technology, which does not change color, does not rust, is waterproof and rain, and can also be used outdoors for a long time.


.Small size and light weight, it can adopt various installation methods such as boom type, wall-mounted type, ceiling type and lamp pole type, and the operation is simple and convenient


The company has passed the ISO international quality system audit certification. This product strictly implements the ISO international quality management system standard production to ensure that the product quality fully meets the national standards and design requirements. The product has an annual warranty (light source warranty for one year), self-purchasing Within one year from the date of the product, the company will be responsible for free maintenance for any failures in the normal use of the product.