Summer solar street lamp maintenance plan

The summer of this year has arrived. In addition to bringing us heat, summer will also bring us torrential rains. Even if the weather is bad, solar street lights still stick to their posts. All kinds of street lighting systems are subject to strict quality inspections when they leave the factory. However, many unexpected situations will occur over time. Public facilities such as solar street lights and LED street lights will malfunction as the temperature rises and the climate changes. It will happen more and more. So the question is, how to deal with the problems of solar LED street lights in summer? Solar light factory lighting answers for everyone: 1. Because most areas of our country belong to the subtropical monsoon climate, they are often attacked by strong winds such as typhoons in summer. Strong winds bring a lot to these street lights with higher heights and weaker foundations. Challenges, so the solar street light’s battery panels and lamps often fall, the light poles are tilted and toppled. This will not only prevent normal lighting work, but also bring great safety to pedestrians and vehicles on the road. Hidden dangers. Therefore, we must check the safety performance of solar street lights and LED street lights and perform maintenance and repair work for eliminating hidden dangers before the strong wind strikes. Go to the site to check the condition of the solar street lights to see if the battery panels and lamps are shaking, whether the street lights are tilted, whether the foundation cage bolts are firm, and whether there is any looseness. If there are any of the above situations, they should be eliminated in time to avoid other situations. 2. As the temperature rises sharply, the energy storage of the battery is also affected. We should check the previous battery in time, and replace the solar battery whose capacity cannot meet the requirements in time to avoid affecting normal operation. 3. Check the waterproof performance of the system. Open the door at the bottom of the solar street light, take out the controller of the solar street light, and check whether there is poor contact, water seepage, tape falling off, etc. at various joints. If there are any of the above phenomena, corresponding rectifications should be made in time to eliminate the hidden dangers as soon as possible. Because the amount of rain in summer is very large, the rainwater generally does not enter the light pole, but the condensation of water vapor will also cause a short circuit. In addition, there are continuous rainstorms in the summer, and the depth of the water often appears unseen in many years. In special circumstances, it is necessary to prevent problems before they happen. The above is provided by the solar street lamp manufacturer-solar lamp factory lighting. For more questions, please click on the right picture to consult online customer service.