Street lamp manufacturers: guide for buying and selling high-pole lamps

High pole lamp generally refers to a new type of lighting device composed of a steel cone-shaped pole above a meter and a high-power combined lamp structure. It has the advantages of wide illumination range and good lighting effect. It is widely used in squares, airports, docks and ports. It can be seen everywhere in our lives. It is an 'artifact' in outdoor lighting at night. When we usually buy, we definitely want to buy a high pole lamp with long service life, excellent quality and good lighting effect. But most of us are laymen and don't know how to buy high pole lights correctly. Today, street lamp manufacturers have compiled a guide for buying and selling high-pole lamps, hoping to help you choose them correctly.

First of all, we must understand the basic structure of the lifting high-pole lamp, which is mainly composed of four parts: the high-pole lamp pole, the lifting system, the high-pole lamp panel and the high-pole lamp lamp. Next, I can analyze from these four major components:

.High pole light pole

The poles of high pole lamps should be made of large wall thickness and overall hot-dip galvanizing. Because the height of the general lift-type high pole lamp is at least more than meters, its wall thickness must be large to ensure its safety in a strong wind environment, and the overall hot-dip galvanizing can ensure that the pole will not rust or corrode every year.

.High pole lamp lifting system

The lifting system is the core component of the lifting high pole lamp. The lifting system is mainly composed of a hoist and a steel wire rope. When we buy, we should try our best to choose a thicker and higher quality wire rope, because the wire rope is not bad, then there will be no problems with the entire lifting system.

.High pole lamp panel

Many people often ignore the quality of the high-pole lamp panel when purchasing. Some street lamp manufacturers make the high-pole lamp panel cold galvanized for profit, which will easily rust after a few years, which will affect the appearance. . Therefore, when purchasing, we must emphasize to the street lamp manufacturer that the high pole lamp panel needs hot-dip galvanizing.

.High pole light fixture

High pole lamps generally use floodlights and floodlights. The light source type can be divided into high pressure sodium lamp and LED light source. No matter which one you choose between them, make sure that they are produced by the brand. Because branded lamps are more excellent in quality and quality, for example, the common brand of high-pressure sodium lamps is Shanghai Yaming, and the common big brand of LED light sources is Philips and so on.

The above is the complete guide for buying and selling high-pole lights. In fact, for buyers, it is important not to be greedy for small and cheap, blindly looking for low prices, and to choose regular street light manufacturers to purchase. The editor suggests that there is a chance If so, it's best to go to the field to investigate.