Street lamp bracket

High lamp installation speed is generally associated with light source, the number of lamps and lanterns, less number of common light source of light, from the morning to normal before it gets dark, the installation is complete, but more than 25 meters high lamp if there are more than 15 light source of lamps and lanterns, then it will be before it gets dark

high lamp installation speed is often associated with the amount of light the lamp. Generally speaking, only a small amount of light source light, can normal installation from morning till night. However, if more than 25 meters high lamp has more than 15 light lamp, is unable to complete before dark. Sometimes, however, the owner or the government asked the next day dawn electric light at night. Install the light in the evening is very dangerous, so everyone in the evening when installing high lamp must be careful. Next, the light manufacturer's technical personnel will tell you how to install the light in the evening. When the lamp panel rises in the evening, we can use a flashlight or car lights provide some light to determine the fuzzy height of the lamp panel. Near the top, the operator should pay special attention to. At this time, even more flashlight can't make you see clearly the location of the hook. At this point, there is only one method can accurately determine whether the lamp panel comes into contact with the hook, namely through listening, when the lamp panel inner ring comes into contact with the hook, will produce friction between iron and iron. The voice is transmitted through the rod body down, stood at the bottom of the people will hear clearly. When friction disappears, we will turn the light plate increases to about 3 cm, and then began to decline. After falling 10 centimeters, we will see if the main wire rope loose. If it is loose, we can determine the hooks have been firmly on the lamp panel. In the evening to install a high lamp is whether the lamp panel hooks in the most accurate method. If there is no size between link and light panel is unqualified, so this method can be 100% success. That is how to install light at night. Here, the light manufacturer's technical personnel need to remind everyone again, they must pay attention to the installation of the night, be careful!