Standard solar energy lamp manufacturers ranked 6 m solar lamp after quality check and accept

Advocate the lamp about five meters high five solar street lamps, Q235 steel plate welding quality, the bottom diameter of 140 mm, the upper diameter of 60 mm, solar street lamp lighting wall thickness is greater than 3. 0 mm。 Using hot dip galvanized anti-corrosion surface treatment after the color coating, coating layer surface density

solar street lamp advocate the lamp is about 5 meters and 5 meters high. Q235 welding of high qualified steel plate rolling. The bottom diameter of 140 mm, the upper diameter of 60 mm, solar light pole wall thickness is greater than 3. 0 mm, surface after galvanizing and anti-corrosion treatment with colored plastic, plastic coating surface should be dense, smooth, durable, discoloration, peeling. The galvanized layer thickness is more than 85 microns, anti-corrosion coating layer thickness should be greater than 100 microns. Solar street light support bar and the rail is made by the national standard of high quality carbon steel. Standard circular tube is 32 mm in diameter, wall thickness is 3 mm; Rail steel wall thickness is 4 mm, support bar and rail surface treatment is the same as the main pole, pickling, galvanizing and plastic-sprayed surface. Solar street lamps under the flange also should use 10 mm thick high quality carbon steel. Surrounding the flange should be smooth, no burr, mounting holes layout is reasonable, accurate, easy to install. Wiring electric door window also should use the same as the solar energy light pole material, appearance rules, the surface is smooth, size is consistent, and should install anti-theft device design and grounding device. Solar street lamps copper wires and the terminal USES the national standard products, meet the use requirements of the installation environment.