Solar yard lamp assembly

1, light pole assembly components, adjust the lamp holder and the direction of the battery components. Assemble the light pole, fastening bolt joint connections, force uniform, if necessary, use thread locking glue ( In general, anchor bolt fastening glue place daub must thread) ； 2, use wear

1, the assembly components and adjust the lamp holder and the direction of the battery components. Assemble the light pole, fastening bolt joint connections, force uniform, if necessary, use thread locking glue ( In general, the LED street lamp, anchor bolt fastening adhesive place daub must thread) ； 2, use wear good threading wire wire. Threading, prohibited forcibly pull, lest cause sheathed wire cut and even rupture. Sheathed wire connected solar battery components and the light source must have enough allowance; Connect the power cord need to bend some of the controller, prevent water along the wire into the terminal. 3, install solar battery components: 1) Component is fixed: bolted solar battery components and two side fastening; 2) Put solar cell components, junction box should keep connecting down; 3) Solar battery components connection principle: a, sheathed wire connected to solar cell components junction box must be used after the silicone to seal; B, sheath line within the light pole, do not bare; C, attachment is completed, use multimeter to test whether various lines correctly.