Solar street light wind machine how Ann solar street lamps installed

Solar street light wind machine installation, attention should be paid to the following: 1, try to avoid the turbulence effect of the wind. Turbulence is an obstacle to the wind after a rough surface or caused a sharp change of wind speed and direction. Turbulent wind machine



solar street light wind machine installation, attention should be paid to the following:

& emsp;   1, try to avoid the turbulence effect of the wind.

    Turbulence is an obstacle to the wind after a rough surface or caused a sharp change of wind speed and direction. Turbulence caused by wind turbine output power reduce wind turbine vibration, and causing the noise, and affect the service life. In order to avoid the influence of turbulence, wind machine should be installed in a relatively open doesn't keep out of place, and to keep a certain distance with houses.

    2, determine the local prevailing winds.

    Wind machine should be installed on the main direction of thunder. Most areas in Inner Mongolia, for example, often blowing northwest wind, wind machine should be installed in the northwest of the building, thus reducing the houses of the blocking effect of the wind.

  & MSP e light pole equipment; 3, pay attention to the installation of solar street light wind machine height.

    Sometimes the wind vertical shear, can affect the operation of wind turbines, so to choose the right wind turbine installation height. In general, more and more close, the obstacles of wind machine must be installed in closer from the building site, be sure to heightening the installation height of wind machine.

    Solar street lights maintenance can use more longer. Solar street lights maintenance method is as follows:

& emsp;   1) Don't let a hard or sharp objects hit solar panels, or solar panels will be damaged.

    2) Don't let the branches in the use, billboards, block surface, so as not to affect the conversion efficiency.

    3) Keep the surface clean, it is suggested that the best half an year is clean solar panels, otherwise will affect the conversion efficiency.

    4) Solar street lamp installation need to lean 30 degrees toward the south.