Solar street light price | | solar street lamp lighting solar street lamp manufacturers3

People is high on the safety of the installation of solar street light, because it's about the people travel security, who also don't want to own travel time, because the solar street light suddenly not lit, this is a very dangerous thing. In order to prevent will not appear this situation, in addition to closely examine the application of solar energy components, more should pay attention to the installation of lamps and lanterns. （ 1) Install lamps and lanterns, want to open the lamps and lanterns, with M10 ( FuGuiYu lamps and lanterns) Or the M8 ( FuGuiYu lamps and lanterns) Allen wrench bolt loosening, and then put the lamp holder inserted into the lamp post, after adjust direction of lamp holder to bolt fastening. （ 2) Source line is negative corresponding connection, when the light source is energy-saving lamps, lamp holder for A double light source of lamps and lanterns, connected to the terminals at the end of the socket all the way L terminal requires A red line, blue line meet N terminal; For single lamp light lamps and lanterns, light line connected to the terminals at the end of the lamp holder B red line to the anode, cathode blue line. When the light source is energy-saving lamps, light source line should be connected to the terminals at the end of the lamp holder C request red line to the anode, the blue line to the cathode, one connected to the ballast D finally will the lamp holder cover battery components and solar street lamps component stents with M6 & times; 20 bolts, M6 6 fastening nut, washer. When installation, it should be installed in the bolt by outgoing, then set the washer and nut fastening, requires bolt joint connection is firm, no loose. This information is provided by lighting exclusive and source from http://www. jhzm88. com/jsaztynldd。 超文本标记语言