Solar street light control mode

one Two control methods: 1. The lamp control: first, through the sensor sensing the strength of the external light. When arrived in a dark light, it will take the initiative to open the solar street light. When an external light arrived at a window, it will be closed this solar street lamps

a. Two control methods:

1. The lamp control: first, through the sensor sensing the strength of the external light. When arrived in a dark light, it will take the initiative to open the solar street light. When an external light arrived at a window, it will be closed solar street light itself. As for the manipulation of light and shade, can be manually adjusted. Now, most of the new rural solar street lights are in this kind of method to choose.

　　2. Time control: the first is on time to admit solar street lamp switch state. This method use the earlier, the LED street light, but use less now. Primary reason for this is that even if the same area in different seasons change, choose time manipulation is not convenient.

2. Manipulation of the device components:

1. Hardware: the combination of circuit board and chip in general.

　　2. Software: according to different solar street lamps production control software.

the above articles by guangdong LuYu lighting technology co. , LTD. (learn more about intelligent street lamp, lamp posts, please pay attention to: