Solar street light configuration what chongqing solar street lamps in the system

1. Light pole for 8, 12, 18 sprayed rod body, by the high strength and high qualified steel plate after cutting, bending, automatic welding, average height is 2, 5, 3 0, 3, 5, 40, such as specifications, design the biggest wind resistance ability to 6 0 m/SEC, from 3 to 4 each specification section splicing group

1. Light pole as the octagon, dodecagon and octagon pyramidal rod body. It is made of high strength and high quality steel plate by shear, bending and automatic welding. The height of the pole, generally speaking, there are 2, 5, 3 0, 3, 5 and 40 specifications. Design of the wind resistance to 6 0 m/s. Each specification including three to four connectors. Flanged steel chassis one-meter diameter to 1. 2 meters, the thickness of 3 0 mm to 40 m 2. Main functions based on the frame structure, decoration materials mainly steel tube and steel tube. Light pole and a panel with hot dip zinc processing. 3. Electric hoist system consists of an electric motor, a hoist, control three sets of hot dip galvanized steel wire rope and cable, etc. Light pole installed within the body, the vertical speed of 3 to 5 meters per minute. 4. Guidance and unloading system is composed of guide wheel and guide arm, to ensure the lamp panel not lateral movement in the process of ascension, and when the lamp panel upgrade in place, lamp panel will automatically fall off the hook and lock. 5. Lighting electrical system should be equipped with 6 mdash2 4 0 0 w - 4 1 0 0 0 w halogen ( The white light) , projectors and floodlight. The computer time controller can automatically control the lighting and local lighting or lighting switch time. 6. Lamps and lanterns of lightning protection system: 1 at the top of the installation. 5 m long lightning rod, based on the underground installation 1 m long ground wire, ground wire and underground bolt welding. ( : the above content according to the solar street light price release]