loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

Solar street light at night can't work normal discharge1

Recently had a customer response to us: solar street light in the dark without light, want to learn about this what to make of it. Here we carefully ask given the following reply: if you have installed solar street lamps, and normal use for a long time, first check the light on the controller's response, if the two indicator not one on, may be the controller has been damaged, appear this kind of reason may system by strong current shock, such as direct lightning or short circuit, and so on and so forth.

if found in solar street lamps controller night light show normal discharge, check when they have enough battery voltage, but is the street lamps and lanterns is not bright, we recommend the solar street light is on the anode is connected directly to the battery negative test, if found such testing can't discharge, then the lamp driver or rectifier is likely to be damaged, suggest use the multimeter to check.

solar street lamps controller shows undervoltage state, not bright lights after dark, but the battery voltage is more than under voltage value, show the battery have electricity. 24 v system, under-voltage protection value is 22. 2V( The controller default) After around, down to the battery voltage, the controller shut off the power and stop discharging, mainly is to protect the storage battery is not affected by excessive discharge and subsequent use of the equipment.

solar street light panels during the day can give a battery charging, charging voltage only charge to 24 v, The controller default) , will continue to discharge, the main purpose of this setting is to avoid battery often period was from damage depth of discharge. Under the condition of the battery voltage, if you don't restart the solar street light controller, 22. 2 v and 24 v are under voltage between state, only the solar street light storage battery voltage is above charge to 24 v will continue to discharge. 【 The above content released by port high lamp factory finishing 】

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service