Solar street lamps to buy, use and maintenance of knowledge collection ( 8) The sun

Reasonable right of solar street light construction is to ensure that the service life of the solar street lamps and lighting effect of the important factors, improper construction and installation will greatly affect the work of solar street lights, such as inadequate rechargeable battery discharge or solar street light work

the reasonable correct solar street light structure is to ensure that the service life of the solar street lamps and lighting effect of the most important factors. Incorrect construction and installation will greatly affect the work of solar street lights, such as solar street light undercharge or work time is too short lead to a battery discharge, etc. Are closely related to the correct installation of solar street lamps. Accordingly, before installing the solar street lights, solar street lamps must be to careful planning, reasonable and feasible construction scheme. The plan should consider the following questions: first, to the overall design of the solar street light light pole position of the theoretical calculation, often there will be a street lamp light pole position does not accord with the design, such as the sun shade, intersection collision avoidance, transportation and hoisting near of the vehicles. This requires a field investigation and on-the-spot decisions; Second, participate in road construction projects ahead of schedule, ahead of the installation of solar street lights and construction preparation: first of all, according to party a's cost budget and road actual illumination and reference standard, determine the solar street lamps, light source, light pole, light pole position, etc. ； Second, the solar street light pole position should be determined rationally spacing and the height of the light pole. , the longer the distance between electrodes of the higher brightness requirements, the lamp power. Therefore, the need for scientific computing, reasonable selecting three parameters, to gain the highest cost performance. Third, road engineering, timely and early intervention selection, foundation construction and embedded pole position, according to the actual field engineering and geological conditions, design and manufacture of solar light pole foundation and high lamp base, to ensure reliable solid foundation. Should pay special attention to the embedded bolt and matching of the reserved hole, accurate positioning, reasonable reserve embedded length and length, and the appropriate protection threaded portion ( Had better be oiled or sheath) For lifting and positioning. 。 Four, in strict accordance with the design specification construction, to ensure that the lamp installation engineering neat and beautiful. Should be based on road design to reasonable linear change, make the light pole straight, from a distance, look from up close. Weld and repair the mouth to avoid the main direction and consistent. Light pole Angle of cantilever should keep the direction and Angle coordinate. Five, the installation of solar street lamps must have a certain azimuth, the correct assembly, to meet the design requirements, ensure that the tilt Angle of solar panels, components, and in strict accordance with the operation regulation of electrical wiring, avoid break or short circuit in the process of operation; Last but not least, installation of traffic lights and light pole, this is the most easily ignored by everyone, must be properly reflected in the plan. Safety plan must be reasonable, practical and get seriously abide by it. Measures such as safety helmet, safety unlined upper garment, warning pile must be strict and detailed.