Solar street lamps system battery Ann light pole in Inner Mongolia

Solar street light system is composed of eight elements, namely, solar panels, solar battery, solar controller, the main light source, battery box, the lamp holder, light pole, and cables. Solar street lamps system working principle is simple, is to use light born v



solar 【 Solar power ( 太阳能) Can refer to the heat of the sun, See the three ways of heat transmission: radiation) , main show is often said that the sun's rays. 】 Street lamp system is composed of eight elements, namely solar panels 【 Solar panels, 太阳能板) Is by absorbing sunlight, the solar radiation through the photoelectric effect or photochemical effect directly or indirectly converted into electrical energy device, the main material of most of the solar panel as the 'silicon', but because of the production cost is larger, so it widely used, we still have some limitations. 】 【, solar battery, solar controller Called the solar controller solar charge controller, is used for solar power generation system, the control of multiple solar cell phalanx of battery and battery for solar power inverter load automatic control equipment. 】 , the main light source, battery box, the lamp holder, light pole, and cables. The solar street lamps Solar street light is a crystalline silicon solar battery power supply, valve control type sealed and maintenance-free battery ( Gel battery) Store electricity, super bright LED as light source, lamps and lanterns and controlled by the intelligent charging and discharging controller, is used to instead of the traditional public power lighting lamps. 】 Working principle of the system is simple, is to use light born v effect' Light born v effect, English name: Photovoltaic effect. 】 Principle of solar panels, the panels during the day to receive solar radiation and convert it into electricity, through the charge and discharge controller' This controller is intelligent to adjust the working voltage of solar panels, always work in V - making solar panels A characteristic curve of maximum power point. 】 Stored in the storage battery, the night when the intensity of illumination is gradually reduced to set data, to the solar panels open circuit voltage is 4. Around 5 v, charge and discharge controller automatically detects the voltage value of the braking instruction, battery discharge lamp holder. Battery discharge 8. Issue braking instruction after 5 hours, charge and discharge controller, storage battery discharge end. Solar street lamps system refers to the form of a set of independent solar street lamps distributed power supply system. It is not subject to regional restriction, not affected by power installation location, also do not need to do wiring buried pipe excavation pavement construction, site construction and installation is very convenient, do not need power transmission and transformation system, not consumption mains, environmentally friendly and energy saving, better comprehensive economic benefit, especially in road has been built to establish solar street lamp is very convenient. 1, the battery in the control box to must take light put, prevent smashed control box; 2, battery cables must be between bolts on the terminal of battery and use copper gaskets to increase electrical conductivity; After 3, output lines connected to the battery in any case banned short sub, avoid damage to the battery; Line 4, the output of the battery and controller connected in the telegraph pole must through PVC pipes; 5, after completion of the above, check the wiring controller, prevent short circuit, after the normal close the door of the control box.