Solar street lamps should be done before the construction

Solar street lamps before installation must be done sufficient preparation, thought through the influence of various factors, to ensure the normal use of the solar street light, so what should be done before the construction preparation? Due to the installation of solar modules, solar street lamps by wind area is large, the ground

solar street lamps before installation must be done sufficient preparation, thought through the influence of various factors, and to ensure the normal use of the solar street light, so what should be done before the construction preparation? For the installation of solar modules, solar street lamps by wind area is large, the ground stress is much larger than the ordinary electric lamps and lanterns, therefore the reasonable construction of solar street light foundation and material selection of right in the whole process of the installation of lamps and lanterns has the effect that cannot ignore. Designers in the design of a particular installation of solar street lamps before the layout, must be conducted to install to surroundings careful investigation, so as not to cause the installation location of irrationality. Solar street lamp installation site selection principle: all round catchment is smooth, if within 10 meters in rivers and pools, rivers and pools of water must be 2 m below the ground surface; No obstructions (around According to the height of the installation of lamps and lanterns) And the high tension line and other dangerous articles; Installation location of underground cable, optical cable, pipes and other public facilities ( Special cases users need to coordinate and solve in advance) 。