Solar street lamps offer how to quickly install solar street lamps

How to quickly install solar street lamps? In order to convenient transportation, usually will be remove, solar street light to reach the designated position again. So for operation personnel, understand the specific assembly method is very important, only in this way can the



& emsp;   How to quickly install solar street lamps? In order to convenient transportation, usually will be remove, solar street light to reach the designated position again. So for operation personnel, understand the specific assembly method is very important, only in this way can have very good effect. So how to quickly install solar street lamps?

how to quickly install solar street lamps

& emsp;   First, the assembly tools should be prepared when the solar street lamps.

    Tools are: multimeter, Allen wrench, phillips screwdriver, long nose pliers, insulating tape and other corresponding tools. After the corresponding tools to complete, so you should choose a safe environment, and used the site location, close to the installation of accordingly.

    But at the time of assembling, should understand somewhat to the assembly sequence of specific, different assembly sequence, the corresponding effect, nature will be different.

& em how much light pole sp;   Second, installation, gasket should be used.

    In the installation of solar street lamp, should also be to use gaskets, main effect is to prevent wear and tear, so that you can prolong the service life of street lamps.

    Third, unpacking processing, according to the listing form, to check for the corresponding parts.

    If lack of, should be timely understanding with solar street light. Of course also should check of spare parts, because in the transport process, will inevitably result in case of damage of parts. Once found the damage situation, then it should be replaced.