Solar street lamps of $3000

The solar battery is one of the important components of solar LED street lamp, battery installation is bad can lead to solar LED road light light effect is not good, does not even light, so installing a solar battery, we should be pay attention to, let the sun

the solar cell is one of the important component of the solar LED street lamp. If the battery installed improperly, solar led street lamp lighting effect will be very poor, even lighting will not occur. Therefore, when installing a solar cell, we should pay special attention to it. When installing battery for solar street lamps manufacturers show you eight questions that should be paid attention to. 1. Before starting installation solar led street light battery, installation personnel ( Or engineering team) Should receive training, this paper introduces the matters needing attention in the process of installation, battery and maintenance matters needing attention, and attention to the safety in the process of installation. 2. Solar led street light installation personnel ( Or teams) Unpacking inspection should be made for batteries and check attachment, the attachment the battery installed in the cabinet system diagram, installation instructions and other documents should be properly kept. According to the construction drawings of the solar street lamps, check the room inside the battery placement is reasonable, whether between maintenance reserved empty and far from the heat source and may produce a spark whether there is a proper distance. 3. Before starting to install solar cells, opened the package, take out the battery system diagram, and in strict accordance with the battery system diagram for installation. Are not allowed to install any missing system components ( Including paste battery unit number) All system components ( Spare parts) Should be completely conform to that stipulated in the installation drawing specifications. 4. Note that the installation of solar led street light system. Because the battery is charging, pay attention to prevent short circuit, all installation tools should be wrapped with insulation belt. 5. Before installing the article connection should use a clean linen cloth to wipe the battery pole, shell, and the dust on the steel, in particular to ensure that in the dust is clean. Single number should be paste is firm. 6. After installing solar battery, check whether all the screws one by one. Appoint someone to check and is responsible for ensuring that all the screws in the fastening state. 7. Solar led street light battery installation inspection, measuring and recording all the cells of open circuit voltage and the voltage of battery pack. 8. Solar led street lamp installation debugging, after check the battery appearance, check the connection screws are tight, ensure the battery shockproof, anti-skid, reliable. When installing solar led street light battery must pay attention to these problems, otherwise it will affect the subsequent use of solar street lamps. If you are installing solar led street lamp encountered other problems, you can directly ask us solar street lamps manufacturer's technical personnel answer for you.