Solar street lamps light pole what are the requirements?

Solar street lamps light pole what are the requirements? Solar street lamps light pole needs to have high corrosion resistance, which requires strictly for hot dip galvanized, hot dip galvanized solar street lamps light pole of corrosion resistance can be increased to more than 30 years, this will ensure that during the period of using, the sun

what are the requirement of solar street light light pole?

light pole is the main supporting parts of solar street lamps, solar street light pole compared with ordinary street lamp, with different requirements of

1, the thickness of the more demanding

solar street light because of the high light pole load requirements, demands a high wind, light pole at the top of the solar panels, wind resistance is bigger, so the thickness of the solar street light requirements are higher, than the same specifications of the ordinary street lamp above the average thickness of 0. More than 5 mm.

the thickness of the solar street light light pole except on the computed values to meet the need to pay special attention to is to keep enough because the calculating numerical prevent solar street lights, solar panels is high bad reserved by configuration.

2, stronger ability to resist wind

solar street lamps light pole wind resistance ability is necessary, because the area is large solar panels, high position, large torque, high center of gravity, so they needed to fight the wind would be bigger, solar street lamp light pole requires very high wind resistance.

3, hot dip galvanized high

solar street lamps light pole needs to have high corrosion resistance, which requires strictly for hot dip galvanized, hot dip galvanized solar street lamps light pole of corrosion resistance can be increased to more than 30 years, this will ensure that during the period of use, solar street lights will not because the rust and brittle, weak.

4, flange demanding

because of solar street light load demand is higher, so the requirement of the flange is also higher, generally require more by the size of the flange, LED street light, the thickness of the more demanding, and reinforcement requirements will increase, double-sided welding, these basic requirements are necessary.